User Manual
User Guide
34
Creating Projects
MixPre-10M will automatically create a project if record is pressed without rst
creating a new project.
To create a new Music project:
1. Tap .
2. Tap Project > New.
3. When the new Music Project screen appears, you can do any of the
following:
X Name the project.
X Set the sample rate. Options include: 44.1kHz, 48kHz, or 96kHz.
L Be sure to choose the correct sample rate when you create a new project; you
cannot change it once created.
When using the 10M as a USB audio interface, ensure that you set the computer
OS, DAW application, and the 10M project to the same sample rate. This prevents
clocking and/or o-speed playback issues.
4. Tap Create when you’re ready to create the new Music project.
L The new project’s name is shown at the top of the Home screen.
For more information, see Project History and Project Folder Structure.
Opening Projects
When switching from the current project to another project, you do not need to
worry about saving the current one; the MixPre automatically saves the current
project’s state.
To open an existing project:
1. Tap .
2. Tap Project > Open. A list of all projects, identied by a music notes
icon, on the SD card is displayed.