User Manual

29
Outputs
The MixPre-10M includes two pairs of outputs, L/R and X1/X2. The L/R TA3
outputs are balanced (ideal for long cable runs), while the X1/X2 3.5mm are
unbalanced.
To route the L/R and X1/X2 stereo outputs:
1. Tap .
2. Tap Outputs.
3. Do either or both of the following:
X Tap L/R Out to route L/R outputs on the right side panel.
X Tap X1/X2 Out to route the X1/X2 output on left side panel.
The L/R outputs and X1/X2 outputs can be fed from the LR mix (stereo or
mono) or can be set to follow whatever is being output in the headphones
(stereo or mono). This is useful for providing a secondary headphone output
feed.
Adjusting Output Level
Adjust output gains to optimize the level feeding downstream devices, such as
active speakers, external mixers, PA gear, etc.
To adjust output gain:
1. Tap .
2. Tap Outputs.
3. Select either of the following:
◦ LR Gain.
◦ X1X2 Gain.
You can adjust L/R and X1/X2 output gains from 0 to -40dB.