User Manual
User Guide
28
L Upon switching track banks, if the knob’s rotational position is not aligned with its
fader value, the LEDs for that knob will illuminate with a pulsing orange light. This
will stop once position and value are re-aligned.
When adjusting the Channel knob, its fader value along with the previously
stored value is shown in orange text at the top of the Home screen and Channel
screens until it reaches its previously stored value, at which point it changes to
black text.
For example:
In this example, the Channel knob track 9 must be rotated clockwise, as
indicated by the arrow, from its current fader value of -18dB. Once it reaches
the track’s previously stored value of -15dB, the mix level will start to be
aected.
L Adjust the Channel knob a small fraction to display the stored value and arrow in
orange text. The displayed arrow and stored value will inform you which way to
rotate the knob.