User Manual

11
Powering
Flexible Powering Options
In designing the MixPre-10M, we felt that it was important for it to be able to
operate in a wide array of applications and environments. To support that goal,
power can be supplied from several possible sources:
• 12 VDC from an AC-to-DC power supply (called XL-WPH3) or external
battery via the provided 4-pin locking power connector (Hirose).
• Eight AA NiMH rechargeable or Lithium primary batteries installed in the
provided 8-AA battery sled, called MX-8AA.
• One or two Sony-type L-mount batteries installed in the optional L-mount
battery sled accessory, called MX-LMount.
L Batteries not included.
The power switch for the MixPre-10M is located in the upper right corner of the
left side panel.
Power Switch
For preservation of battery power, 4-pin Hirose power sources take priority over
batteries if both are connected.
To ensure Battery Status indicator displays accurate levels/status:
1. Tap .
2. Page through submenu and tap Power.