Quick start Guide
User Guide
4
and Mute settings.
L You can only use Air on one track at a time.
13. (Optional) Should you want to scrap the recording and try again, tap
and then tap History. Using the HP encoder, rotate to highlight and select
Restart Song.
14. To lay another track over the just-recorded track, congure an input and
proceed from there. See step 7. Congure an input..
15. After laying down all of your tracks, play your song and adjust track mix
levels, pans, reverb, air, etc.
16. When you have a mix that you like, you can easily share your le by using
the Render feature.
(A) Tap and then tap Render.
(B) Select the format you want to use to render (export) the le. Options
include: Wav stereo, AAC stereo, or Wav All Isos.
This will perform a real-time render of your project. Feel free to
dynamically adjust mix levels, pans, reverbs etc during the render
process.
17. Most importantly, have fun creating music! No saving of the project need
be done, since the MixPre automatically takes care of that for you.