Manual

CL-16 User Guide
11
Modes/Meter Views
The CL-16 has various operation modes (listed below).
Changing a mode changes the function of the multi-function
knobs and in some cases, switches the LCD Meter View.
The function and/or value of the multi-function knobs are
displayed in the Upper and Middle Row LCD elds and in the
top left corner descriptor elds.
CH 1-16 (DEFAULT HOME METER VIEW) Press Meter
button to always get back to this default home meter
view. Rotate upper knobs to adjust output gains; press
and hold Menu then press an upper knob to mute the
corresponding output.
CH 17-32 (BANK) Press Bank button. The Bank button
blinks green and the meter view changes to a green
background. Rotate middle knobs to adjust Ch 17-32
fader gain; press while holding Menu to mute.
Rotate upper knobs to adjust output gains; press and
hold Menu then press upper an upper knob to mute
the correspongin outputs. Banking to Ch17-32 can
be disabled by navigating to Controllers>CL-16>Bank
Disable to On.
PAN CH 1-16 Press Pan button when viewing Ch 1-16.
Pan button illuminates pink. Rotate middle knobs to
adjust ch 1-16 pan; press knobs to center pan. Pan
position is indicated by a horizontal blue bar.
Rotate upper knobs to adjust output gains; press while
holding menu to mute outputs.
PAN CH 17-32 Press Pan button when viewing Ch
17-32. Pan button illuminates pink. Rotate middle knobs
to adjust ch 17-32 pan; press knobs to center pan. Pan
position is indicated by a horizontal blue bar.
Rotate upper knobs to adjust output gains; while holding
menu to mute outputs.
DELAY/POLARITY CH 1-16 Press Dly Button. Dly
button illuminates light blue. Rotate middle knobs to
adjust ch 1-16 delay; press knobs to invert polarity.
Rotate upper knobs to adjust output gains; press while
holding menu to mute outputs.
ARM Press and hold Arm button (arms can only be
toggled when holding the arm button). Displays channel
1-16 arm status on trim pot ring LEDs and channel 17-32
arm status on middle knob ring LEDs. Red is armed.
Press knobs to toggle arm/disarm. In Buses mode (press
Bus), pressing and holding Arm displays bus arms (Bus
1, Bus 2, Bus L, Bus R) on middle knob ring LEDs. In a
Bus Sends on Faders mode, pressing and holding Arm
displays all arms:- Ch 1-16 arms on trim pot ring LEDs,
Ch 17-32 arms on middle knob ring LEDs, and bus arms
on upper knob ring LEDs.
BUSES Press to display Bus 1-10, L, R meters on the
CL-16 LCD and Bus Routing screens on the 8-series
LCD Bus button illuminates light pink. Rotate middle
knobs to adjust Bus L, R, B1 - B10 master gains; move
a toggle left to solo a bus; press while holding Menu to
mute. Rotate upper knobs to adjust output gains; press
while holding Menu to mute outputs.
BUS SENDS ON FADERS CH 1-16 Press Bus button
+ Sel toggle. The bus is solo’d and its routing screen is
displayed on the 8-series LCD. The Bus button blinks
light pink and the meter view changes to a light blue
background. Press middle knobs to route Ch 1-16 to
bus prefade (green), postfade (orange) or via send gain
(light blue). When set to send gain, rotate middle knob
to adjust send gain. Press Bank button to access sends
for ch 17-32. Rotate upper knobs to adjust master Bus
gains; press upper knobs to mute buses.
BUS SENDS ON FADERS CH 17-32 Press Bus button +
Sel toggle when viewing Ch 17-32. The bus is solo’d and
its routing screen is displayed on the 8-series LCD. The
Bus button blinks light pink and the meter view changes
to a light blue background. Press middle knobs to route
Ch 17-32 to bus prefade (green), postfade (orange) or
via send gain (light blue). When set to send gain, rotate
middle knob to adjust send gain. Press Bank button to
access sends for Ch 1-16.
HPF CH 1-16 Press and hold Bank button then Pan
button. Rotate top knobs to adjust HPF freq. Press
middle knobs to bypass HPF.
EQ LF CH 1-16 Press and hold Bank button then Arm
button. Rotate top knobs to adjust LF freq/Q. Press top
knobs to toggle between LF freq/Q. Rotate middle knobs
to adjust LF gain. Press middle knobs to bypass LF. Use
Mic toggle to switch LF band between Off/Pre/Post. Use
Fav toggle to toggle LF band between Peak and Shelf.
When adjusting a channel’s top or middle EQ knobs, its
EQ curve is displayed on the 8-series LCD.
EQ MF CH 1-16 Press and hold Bank button then Bus
button. Rotate top knobs to adjust MF freq/Q. Press
top knobs to toggle between MF freq/Q. Rotate middle
knobs to adjust MF gain. Press middle knobs to bypass
MF. Use Mic toggle to switch MF band between Off/
Pre/Post. When adjusting a channel’s top or middle EQ
knobs, its EQ curve is displayed on the 8-series LCD.
EQ HF CH 1-16 Press and hold Bank button then Dly
button. Rotate top knobs to adjust HF freq/Q. Press top
knobs to toggle between HF freq/Q. Rotate middle knobs
to adjust HF gain. Press middle knobs to bypass HF. Use
Mic toggle to switch HF band between Off/Pre/Post. Use
Fav toggle to toggle HF band between Peak and Shelf.
When adjusting a channel’s top or middle EQ knobs, its
EQ curve is displayed on the 8-series LCD.
CH 1-16 FAT CHANNELS Sel toggle. Rotate and/or
press top and middle knobs to adjust various channel
parameters.
CH 17-32 FAT CHANNELS Bank button + Sel toggle.
Rotate and/or press top and middle knobs to adjust
various channel parameters.