User manual
11 12
Here’s how you do it!
1 Insert a microSD card.
microSD Card
microSD
Card
2 Press .
3 Navigate through tracks.
Besides streaming music
from your smart phone
wirelessly via
Bluetooth
,
the Sound Blaster Roar
can also play audio files on
a microSD card with the
built-in WMA/MP3 player.
Playback tips
●
You can play WMA,
WAV or MP3 files.
●
The Sound Blaster Roar
supports microSD or
microSDHC cards up to
32GB.
OR
To skip folders:
Press and hold or during playback.
Press or when playback is stopped.
The Sound Blaster Roar doubles up as a microSD
card reader!
Here’s how you do it!
1 Slide the slider switch to USB Mass Storage to
connect as USB Mass Storage mode.
2 Connect the speaker to a computer via USB cable.
3 Insert a microSD card.
4 Browse or modify microSD card contents on your
computer.
Your Sound Blaster Roar comes with a built-in
WMA/MP3 player.
Recording is made really easy with the
Sound Blaster Roar.
If you need to record the
song playing on your
Sound Blaster Roar or
do a voice recording, just
insert a microSD card
and you’re ready to go.
Here’s how you do it!
1 Insert a microSD card.
2 Select source.
From built-in microphone
Switch on the microphone.
– Records voice and sounds
picked up by the microphone.
From Aux-in /
Bluetooth
source
Mute the microphone.
– Records Aux-in audio
directly from your media
player or
Bluetooth
device.
Recording
specifications
●
Audio recording is
saved in WAV format
in the VOICE folder.
●
For recording, a
Class 4 microSD card
is recommended.
●
The default recording
sampling rate is at 16
kHz. This is designed
to record longer voice
recording sessions
(e.g. meetings) and
avoid large file sizes.
●
Recording from
microphone also
records the audio
coming out from
Bluetooth
and Aux-in
audio sources.
●
Simultaneous WMA /
MP3 audio playback
using microSD card
and audio recording
is not supported.
3 Press (REC) to start
recording.
Press (REC) again to
stop recording.
4 Press (REC) to playback
recordings.
To skip recorded tracks:
Press or during playback.
Playing MP3 / WMA audio files
Recording audio with your speaker
To skip tracks (in Repeat All mode):
Press or during playback.
Note:
●
To switch back to USB Audio mode, slide the slider switch to
USB Audio.
●
Depending on your operating system, a pop-up message may
appear informing you that the Mass Storage Device has not
been ejected properly. This is normal and not disruptive to your
microSD card.