User Manual

3 / 16
II. Set up the Security Devices
2.1 Security Panel
Installation Diagram
(1) Wall Mount
(2) Placed on the Desktop
Security Panel×1 Wall Hanging Plate×1
Screws×2
1. Install the hanging
plate on the wall with
screws.
Note: The screws must
be all nailed to the wall,
and the hanging board
must be parallel.
2. Align the hole on the
back of the panel with the
hanging plate and install it.
Note: For concealed wire
installation, please remove
the bracket and cable clip.
Note:
1) Installed in the center of the home to facilitate signal reception and transmission.
2) Avoid installing all devices on metal surfaces, as well as on load-bearing walls.
Comes with a Stand on the Back
It can be directly placed on the
desktop, free from the installation
of holes on the wall, and can be
placed anywhere in the home.