Product Manual
MECHANICAL INSTALLATION
IMPORTANT!
collapses.
Do not use the pump for the structural support of
the piping system. Be certain the system components
pumped.
Sucon Installaon Best Pracces
be pumped.
water.
- Sucon hose should be reinforced to prevent
collapse.
Discharge Installaon Best Pracces
2
WARNING!
be sealed with appropriate sealeant or sealant tape to
WARNING!
whether the tank is empty or full.
CAUTION!
•
•
•
•
•
CAUTION! DC powered pumps are designed to operate
the wire in case of electrical short.
ELECTRICAL INSTALLATION
DANGER! Be certain the power switch is “OFF” prior to
hazards.
WARNING! NEVER disconnect the power cable while
pump is switched on. ALWAYS switch the pump o
PRIOR to disconnecng all the baery clamps or plug
from the power source. Electrical shorts, sparks, or
unexpected start up can occur.
jacket of the cable that exposes wiring requires replacement of
the power cable. The power cable terminates in black and red
ground wire.
If so equipped,
ground. DO NOT
power source post.
post of the DC power source.
1.
2.
DC Power
Chassis
1
2
3
AC Power
WARNING!
by a licensed electrician in compliance with local, state,
pump. The pump must be properly grounded.
Black
Red
•
OPTIONS
•
•
•
•
•
• Santoprene
®
or Hytrel
®
diaphragm