Product Manual
To further disassemble pump, aer #3 above:
Assembly in reverse order. Hand start
WARNING! DO NOT disassemble the yoke assembly
(item 23)
NOTES:
Test pump was mounted on a 55 gallon drum of
A longer or smaller diameter inlet pipe will lower
component used.
4
Viscosity Correcon Chart
Motor/Gear Assembly Removal
1.
is required.
Gear Assembly Replacement
WARNING! DO NOT DISASSEMBLE GEAR ASSEMBLY.
and must not be altered. DO NOT ATTEMPT TO REPLACE
INDIVIDUAL PARTS. REPLACE ENTIRE ASSEMBLY WHEN
REQUIRED .
Diaphragm Assembly/Check Valve Replacement (cont’d)