Product Manual
SERIES 400B DIAPHRAGM PUMP
For Chemical & Lubricant Transfer
Owner’s Operation & Safety Manual
All 400B, FR205B, and FR210B Models
SAFETY INSTRUCTIONS
1.
with the appropriate sealant or sealant tape to minimize
This is under extreme pressure and injury could result.
GENERAL DESCRIPTION
TECHNICAL INFORMATION
Design Features
• 12 VDC rated at 20 amps
amp fuse
NOT
Fluid Compability
and
industrial chemicals, and lubricants. Model numbers reference
the diaphragm material. Always refer to the Sotera Chemical
Santoprene
®
diaphragms designed for use with chemicals.*
•
Hytrel
®
diaphragms designed for use with oils and
WARNING! This pump shall not be used to fuel any
WARNING!
WARNING! T
WARNING! Electrical wiring should be performed
and conductor seal should be used where applicable.
The 400 Series pump is NOT compable with:
WARNING! The pump motor is equipped with thermal
the pump power if this occurs. As the motor cools, it will
start without warning if power is on.
Weed Materials
•
• Stainless Steel fasteners
•
•
• Santoprene and Hytrel Diaphragms
1