Safety data sheet

Soshine International
Library Sort
Product Specifications
VER
A01
Library Name
Li-ion Rechargeable Battery
Date
2018/08/28
Protection
2 Polymer Li-ion Battery Pack Characteristics
Test item
Test conditions
Requirements
(1) Outside
Appearance
Visual check
No abnormal stain,
Deformation nor damage
(2) Standard test
conditions
Measurements are carried out at 20±5℃ and relative
humidity of 65±20% without other specified condition.
Accuracy of voltmeters and ammeters used in test is
equal to or better than the grade 0.5.
(3) Full
charge
Cells shall be charged continuously at the constant
current 1.8A to 4.2V, then charge at the constant voltage
of 4.2V until the end current of 0.01C5mA
(4) Standard
discharge
Cells shall be discharged continuously at the constant
current of 0.36A to 2.75V
(5) Open-circuit
voltage (OCV)
≥3.7V
(6) Rated
Capacity
Cells shall be charged in Item (3) and discharged in Item
(4) within 10minutes after full charged. If the discharge
duration does not reach the specified value, the test may
be repeated up to three times in total.
Rated capacity:
≥3500mAh
(7) Cycle Life (20
℃)
Cells shall be charged continuously at the constant
current of 0.2C5mA to 4.2V and discharged
continuously at the constant current of 0.2C5mA to
2.75V.A cycles defined as one charge and
discharge .carry out cycles until discharge capacity
<80% C5mAh
≥800 cycles