Data Sheet

4. Arduino MC60(E) Shield description
− LEDs: Red LED – Network Light
permanently OFF
MC60 module is OFF
64 ms ON / 800 ms OFF
MC60 is not logged in the network
64 ms ON / 2000 ms OFF
MC60 is logged in the network
64 ms ON / 600 ms OFF
Ongoing GPRS data transfer
− Green LED: Shield Powered
− Yellow LED: 1PPS (1 Pulse Per Second)
5. Connectors on MC60 Shield:
Conn J1 (POWER)
Signal
PIN1
No connection
PIN2
No connection
PIN3
5VDC from Arduino board
PIN4
GND
PIN5
GND
PIN6
VIN – 6-12VDC from external power source
Conn J2 (ANALOG)
Signal
PIN1
No connection
PIN2
No connection
PIN3
No connection
PIN4
No connection
PIN5
No connection
PIN6
No connection
Conn J3 (Digital8_13)
Signal
PIN1
PWRKEY (default)
PIN2
No connection
PIN3
GSMON (must be HIGH to enable communication with
MC60)
PIN4
No connection
PIN5
No connection
PIN6
No connection
PIN7
GND
PIN8
No connection
Conn J4 (Digital0_7)
Signal
PIN1
D0_RX (Arduino ---> MC60 Shield) default