User's Manual
Table Of Contents
- 1. Introduction
- 2. Definitions
- 3. Spider SAS Overview
- 4. Precautions for use and maintenance
- 5. Cleaning
- 6. User profile
- 7. General description
- 8. Patient Use
- 9. How to pair Spider SAS (Windows)
- 10. Starting a recording with HookUp RS
- 11. Starting recording: anonymous mode
- 12. Stopping a recording
- 13. Software, hardware and accessories
- 14. Technical specifications
- 15. Appendix 1: Patient recommendations
- 16. Appendix 2: electromagnetic compatibility
- 16.1. Guidance and manufacturer's declaration
- 16.2. Guidance and manufacturer's declaration: cable length
- 16.3. Guidance and manufacturer's declaration: electromagnetic emissions
- 16.4. Guidance and manufacturer's declaration: magnetic and electromagnetic immunity
- 16.5. Guidance and manufacturer's declaration: electromagnetic immunity, portable RF equipment
- 16.6. Spider SAS and mobiles (recommendations)
Connection to φ Hub
1. Insert the tube onto the connector
2. Gently screw clockwise a quarter turn to
ensure a perfect connection with the
pressure sensor.
Adjust the other end of the nasal cannula as described in § 8.6
Removal from φ Hub
After waking up, the patient shall remove the nasal cannula completely. In the case of a
second night recording, the cannula must be reconnected as described above.
HOW TO CONNECT FINGER SENSOR TO Φ HUB
Put the sensor on the finger that the patient prefers according to comfort and
recommendations given in § 8.7.
Connect the finger sensor (SpO
2
) cable to the connector located at the bottom of φ Hub by
pushing it at the maximum. The metal part of the connector is no longer visible and the cable
is firmly maintained.
15.3.1.
15.3.2.
15.4.
15. APPENDIX 1: PATIENT RECOMMENDATIONS
52 SPIDER SAS – PHYSIO HUB – HOOKUP RS – U908F