User's Manual
Table Of Contents
- 1. Introduction
- 2. Definitions
- 3. Spider SAS Overview
- 4. Precautions for use and maintenance
- 5. Cleaning
- 6. User profile
- 7. General description
- 8. Patient Use
- 9. How to pair Spider SAS (Windows)
- 10. Starting a recording with HookUp RS
- 11. Starting recording: anonymous mode
- 12. Stopping a recording
- 13. Software, hardware and accessories
- 14. Technical specifications
- 15. Appendix 1: Patient recommendations
- 16. Appendix 2: electromagnetic compatibility
- 16.1. Guidance and manufacturer's declaration
- 16.2. Guidance and manufacturer's declaration: cable length
- 16.3. Guidance and manufacturer's declaration: electromagnetic emissions
- 16.4. Guidance and manufacturer's declaration: magnetic and electromagnetic immunity
- 16.5. Guidance and manufacturer's declaration: electromagnetic immunity, portable RF equipment
- 16.6. Spider SAS and mobiles (recommendations)
To be efficient, the duration of contact with each element of Spider SAS must be strictly
respected according to the instructions provided by the product manufacturer.
CAUTION: If the protocol used requires disinfection of the electrical contacts (battery
contacts of the recorder and the contacts of µSD card), it is essential to carefully dry these
contacts before reusing the Spider SAS and the µSD card.
CAUTION: Never put Spider SAS, Physio Hub and active sensors in a liquid or a disinfectant
solution. Never put Spider SAS and its accessories in an autoclave. Do not sterilize Spider
SAS, Physio Hub, sensors, cables or cards.
NOTE: In normal conditions of use, the disinfectant solution does not alter the functions and
characteristics of our devices and accessories, however, the plastic case may discolor
slightly in the long term. These modifications are essentially due to the presence of chloride
ions and ethanol in some solutions.
5. CLEANING
18 SPIDER SAS – PHYSIO HUB – HOOKUP RS – U908F