User's Manual
Table Of Contents
- 1. Introduction
- 2. Indication
- 3. User profile
- 4. Warnings and precautions
- 5. Familiarize yourself with your Smart Spot
- 6. Using your Smart Spot
- 7. Traveling
- 8. Smart Spot basic care
- 9. Maintenance and recycling
- 10. FAQ
- 11. Technical Specifications
- 12. Data protection
- 13. Declaration of conformity
- 14. Electromagnetic compatibility
- 15. Intended use and Essential performance
- 16. Technical assistance
- 17. Explanation of symbols
again, then proceed to transmission.
OFF
2 Constant Green
Constant RED
Meaning: The implanted device is not compatible
with the Smart Spot. It cannot be interrogated.
Action: Contact MicroPort technical assistance for
guidance.
OFF
3 Constant Green
Constant RED
Meaning: The Smart Spot cannot connect to the
network.
Action:
― Unplug the Smart Spot.
― Move it to another location to recover cell
signal.
― Plug the power supply block into the mains,
then proceed to transmission.
OFF
4 Constant Green
Constant RED
Meaning: The Smart Spot can connect to the
network, but data cannot be transferred.
Action: Contact technical assistance for guidance.
OFF
5 Constant Green
Constant RED
Meaning: Patient is not enrolled in the SMARTVIEW
remote monitoring system.
Action: Contact the clinic who has to enroll patient
details in the SMARTVIEW website before any new
transmission.
7. TRAVELING
To know whether your Smart Spot will
operate in the country where you travel,
please call our technical assistance who will give
you relevant instructions.
8. SMART SPOT BASIC CARE
Your Smart Spot has been designed to successfully
pass the safety and regulatory standards. To
maintain your Smart Spot in proper working order,
prevent it from being splashed with any kind of
liquid. If you need to clean it, please use only a soft
dry cloth. Any other cleaning method could damage
your Smart Spot. Do not use any kind of detergents
even dry ones.
9. MAINTENANCE AND RECYCLING
The Smart Spot requires no maintenance.
As with all electronic devices, recycling your Smart
Spot is mandatory, therefore please return it to
MicroPort if it no longer functions, or you no longer
use or need it.
Please contact our MicroPort technical assistance
for more information on the collection procedure.
MicroPort will be in charge of its collection and
recycling.
10. FAQ
Why do I need to be monitored?
You have been advised to use MicroPort's Smart
Spot so that your doctor can closely follow your
heart disease and identify potential needs for
adjustments to your treatment. Should you have
any questions or need further information, please
contact your doctor.
What should I do if I don't feel well?
When experiencing symptoms, you should call your
doctor or your local emergency service. Our
technology does not replace them under any
circumstances.
Does the communication cost me anything?
The communication will be free of charge.
Our Smart Spot does not use your personal phone
lines to transfer information to your doctor. It uses
an embedded communication system, and costs are
covered by MicroPort.
11. TECHNICAL SPECIFICATIONS
If you suspect any kind of fault, please call our
MicroPort technical assistance. Our technicians will
help you and investigate if needed.
Part number KC861
Dimensions
of the Smart
Spot
Height: 59 mm
Width: 156 mm
Depth: 122 mm
Weight of the
Smart Spot
250 g
6 Smart Spot – UA10275A