User's Manual

14.5. RECOMMENDED SEPARATION DISTANCES BETWEEN PORTABLE AND MOBILE RF
COMMUNICATIONS EQUIPMENT AND THE SMART SPOT
The Smart Spot is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The user of the Smart Spot can help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment (transmitters) and the Smart
Spot as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output power
of transmitter
W
Separation distance according to frequency of transmitter
m
150 kHz to 80 MHz
d=1.2
√
P
80 MHz to 800 MHz
d=1.2
√
P
800 MHz to 2.5 GHz
d=2.3
√
P
0.01 0.12
0.12 0.23
0.1 0.38
0.38
0.73
1 1.2 1.2 2.3
10 3.8 3.8 7.3
100 12 12 23
15. INTENDED USE AND ESSENTIAL PERFORMANCE
The Smart Spot's intended use is to:
1. Collect Patient data from a MicroPort implanted brady cardiac device using a telemetry head.
2. Transfer collected Patient data to a data management system through a mobile telephone line.
The essential performance of the Smart Spot is to ensure data integrity when it transfers data from a
MicroPort implanted cardiac device to the central data management system. Should the Smart Spot's
essential performance deteriorate, a new transmission or an in-clinic follow up could be necessary.
16. TECHNICAL ASSISTANCE
For any assistance or question you may have about your Smart Spot, please call our MicroPort technical
assistance. Our technical assistance is open from Monday to Friday local time, except on public holidays. See
the leaflet “Technical assistance numbers” to know which number corresponds to your country.
Smart Spot – UA10275A 11