User's Manual

ENGLISH – 13
To operate properly, your SMARTVIEW monitor should
always be connected to the mains power outlet.
5.2. COMPLETE THE INSTALLATION WITH
COMMUNICATION SETUP
At this stage, your SMARTVIEW monitor will need to “talk” with your
Sorin implanted device. You will not feel anything as it is fully
independent of your clinical treatment.
Press the Patient Initiated Transfer button gently until you feel a click.
You will see the Patient Initiated Transfer button will now be constant
green for between 30 seconds and 1 minute. Wait until the green light
turns completely OFF.
Your SMARTVIEW monitor is fully operational and your doctor has
already been notified that the installation has run successfully. Your
Sorin implanted device is now being monitored.
The communication setup is requested at first
installation only. Disconnecting and reconnecting the
SMARTVIEW monitor does not require setting up the
communication again.
5.3. OPERATIONAL USAGE
In order to reduce any inconvenience, your SMARTVIEW monitor is set
up to read your Sorin implanted device at night while you sleep.
If the status light is OFF, check all connections. If the problem persists,
call our toll-free technical assistance.