User's Manual

8 – ENGLISH
3.3. PRECAUTIONS FOR SAFE OPERATION
Location – Preferably the SMARTVIEW monitor should be placed in a
stable position on the nightstand of the patient, as close as possible to
the side of the bed the patient usually sleeps.
Power supply – The SMARTVIEW monitor should be connected
exclusively to a Sorin power adaptor.
Power supply protection – Power adaptors should be routed so they are
not likely to be walked on or pinched by items placed on or against them.
Power supply disconnection – The power socket must be near the
SMARTVIEW monitor and easily accessible. You can only remove power
from the SMARTVIEW monitor by disconnecting the power adaptor from the
outlet. Always carefully disconnect all plugs by pulling on the plug and
not on the cord.
Wireless communication – The SMARTVIEW monitor is designed for
use with cellular network. It is intended to transmit your personal data
using a cell phone operator. The operator and number to call are pre-
configured, there is nothing to tune.
Check button – Do not press the Check button on the bottom of the
monitor unless requested to do so by our toll-free technical assistance.
Interferences – The SMARTVIEW monitor can be influenced by other
household appliances (such as alarm clock, mobile phone). If possible, you
should avoid placing electrical appliances next to the SMARTVIEW monitor.