User's Manual

ENGLISH –

14.3. RECOMMENDED SEPARATION DISTANCES

BETWEEN PORTABLE AND MOBILE RF

COMMUNICATIONS EQUIPMENT AND THE

SMARTVIEW MONITOR

The SMARTVIEW monitor is intended for use in an electromagnetic environment in which radiated

RF disturbances are controlled. The user of the SMARTVIEW monitor can help prevent

electromagnetic interference by maintaining a minimum distance between portable and mobile RF

communications equipment (transmitters) and the SMARTVIEW monitor as recommended below,

according to the maximum output power of the communications equipment.

Separation distance according to frequency of transmitter

Rated

maximum

output

power of

transmitter

150 kHz to 80 MHz

Pd 2.1=

80 MHz to 800 MHz

Pd 2.1=

800 MHz to 2.5 GHz

Pd 3.2=

0.01 0.12 0.12 0.23

0.1 0.38 0.38 0.73

1 1.2 1.2 2.3

10 3.8 3.8 7.3

100 12 12 23

For transmitters rated at a maximum output power not listed above, the recommended

separation distance d in meters (m) can be estimated using the equation applicable to the

frequency of the transmitter, where P is the maximum output power rating of the

transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range

applies.

NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is

affected by absorption and reflection from structures, objects and people.