User's Manual
Table Of Contents
- 1. Warnings and precautions
- 2. Warranty conditions
- 3. The programmer system
- 4. The programmer tablet
- 5. The programmer software
- 6. The docking station
- 7. The inductive programming head
- 8. The radio frequency (RF) link
- 9. The ECG
- 10. The printer
- 11. Maintenance
- 12. Guidance and manufacturer's declaration
- 12.1. Radio equipment emission
- 12.2. Recommended separation distances according to the maximum output power of the communications equipment
- 12.3. Cable length
- 12.4. Electromagnetic emissions
- 12.5. Magnetic and Electromagnetic Immunity
- 12.6. Electromagnetic Immunity, Portable Radio Frequency Equipment
- 12.7. Raw materials
- 13. Technical data
- 13.1. Conformity of the programmer
- 13.2. US Federal Communications Commissions (FCC) and Industry Canada
- 13.3. Essential performances
- 13.4. Power supply
- 13.5. Dimensions programmer tablet
- 13.6. Dimensions docking station
- 13.7. Dimensions inductive programming head
- 13.8. Use constraints
- 13.9. Storage constraints
- 13.10. System specifications of the programmer
- 14. Explanation of symbols
- 15. Glossary
4. THE PROGRAMMER TABLET
COMPONENTS
Front view
1) P1: for maintenance purpose only 7) Docking connector
2) P2: for maintenance purpose only 8) I/O ports
3) Power on/off button 9) Connectivity LED indicator
-Blue: Bluetooth module is on
4) Expansion module connection (not in use) 10) HDD LED indicator
-Flashing green: Hard Disk Drive is working
5) Touch screen 11) Battery status LED indicator
-Green: Battery is fully charged (>95%)
-Amber: Battery is charging
-Amber: Battery life is lower than 10%
6) Power adapter port
NOTE: There is no camera installed in the programmer tablet.
4.1.
4. THE PROGRAMMER TABLET
SmartTouch – UA10412A 9