User's Manual
Table Of Contents
- 1. Warnings and precautions
- 2. Warranty conditions
- 3. The programmer system
- 4. The programmer tablet
- 5. The programmer software
- 6. The docking station
- 7. The inductive programming head
- 8. The radio frequency (RF) link
- 9. The ECG
- 10. The printer
- 11. Maintenance
- 12. Guidance and manufacturer's declaration
- 12.1. Radio equipment emission
- 12.2. Recommended separation distances according to the maximum output power of the communications equipment
- 12.3. Cable length
- 12.4. Electromagnetic emissions
- 12.5. Magnetic and Electromagnetic Immunity
- 12.6. Electromagnetic Immunity, Portable Radio Frequency Equipment
- 12.7. Raw materials
- 13. Technical data
- 13.1. Conformity of the programmer
- 13.2. US Federal Communications Commissions (FCC) and Industry Canada
- 13.3. Essential performances
- 13.4. Power supply
- 13.5. Dimensions programmer tablet
- 13.6. Dimensions docking station
- 13.7. Dimensions inductive programming head
- 13.8. Use constraints
- 13.9. Storage constraints
- 13.10. System specifications of the programmer
- 14. Explanation of symbols
- 15. Glossary
GENERAL INFORMATION
When placing the programmer tablet in the docking station, ensure that the docking station
is positioned on an even, stable surface. The lock mechanism of the docking station will
automatically lock in the tablet when placed in the correct position.
The docking station can be used to charge the tablet. To do so, connect the docking station
with an electrical outlet using the power adapter as described in chapter 4.2. The tablet is
charging when the battery status LED indicator at the front of the docking station lights up.
Before removing the tablet from the docking station, move the mechanical lock of the docking
station to its ‘unlocked’ position.
6.2.
6. THE DOCKING STATION
SmartTouch – UA10412A 17