User's Manual
Table Of Contents
- 1. Warnings and precautions
- 2. Warranty conditions
- 3. The programmer system
- 4. The programmer tablet
- 5. The programmer software
- 6. The docking station
- 7. The inductive programming head
- 8. The radio frequency (RF) link
- 9. The ECG
- 10. The printer
- 11. Maintenance
- 12. Guidance and manufacturer's declaration
- 12.1. Radio equipment emission
- 12.2. Recommended separation distances according to the maximum output power of the communications equipment
- 12.3. Cable length
- 12.4. Electromagnetic emissions
- 12.5. Magnetic and Electromagnetic Immunity
- 12.6. Electromagnetic Immunity, Portable Radio Frequency Equipment
- 12.7. Raw materials
- 13. Technical data
- 13.1. Conformity of the programmer
- 13.2. US Federal Communications Commissions (FCC) and Industry Canada
- 13.3. Essential performances
- 13.4. Power supply
- 13.5. Dimensions programmer tablet
- 13.6. Dimensions docking station
- 13.7. Dimensions inductive programming head
- 13.8. Use constraints
- 13.9. Storage constraints
- 13.10. System specifications of the programmer
- 14. Explanation of symbols
- 15. Glossary
Left view
1) I/O ports cover 3) USB 3.0 (blue marking) 5) Audio jack (not in use)
2) Micro HDMI 4) USB 2.0
Power adapter and cable
NOTE: The power adapter connects the programmer tablet or the docking station with the
external power supply.
CHARGING THE TABLET
Only use the power adapter provided by the manufacturer for charging the programmer
tablet.
Fully charge the battery of the programmer tablet before using it in battery mode for the first
time.
Ensure that the programmer tablet is ALWAYS sufficiently charged when using it in battery
mode. Therefore, keep the tablet connected to a power supply in case of non-mobile usage
or when not in use. If the tablet is not charged sufficiently, you may not be able to complete
the procedure without re-connecting the tablet to an external power supply.
Connect the power cable with the power adapter. To charge the programmer tablet connect
the free end of the power adapter to the tablet or to the rear of the docking station and the free
end of the power cable to the power socket. The battery status LED in the upper left corner
of the tablet screen will light up.
The battery LED in the upper left corner of the tablet screen will give an indication about the
tablet’s battery status:
― Green: Battery is fully charged (>95%).
― Amber: Battery is charging (tablet connected to a power supply)
― Amber: Battery life is lower than 10% (tablet not connected to a power supply)
4.2.
4. THE PROGRAMMER TABLET
SmartTouch – UA10412A 11