User's Manual

US-ENGLISH – 41
14.7. CHOOSING THE TYPE OF LEAD
The defibrillator should be connected to:
 one bipolar atrial sensing/pacing lead
 one ventricular defibrillation lead with sensing/pacing bipolar
electrodes, and one or two defibrillation electrodes.
The choice of leads and their configuration is left to the implanting
physician’s judgment.
Note: In case no atrial lead is implanted, the atrial port should be
plugged with IS-1 insulating plug and a single chamber mode (VVI-
VVIR) should be programmed. PARAD and PARAD+ should not be
used.
Connectors: The bipolar pacing/sensing connectors are compliant
with the IS-1 standard and the defibrillation connectors are compliant
with the DF-1 standard.
 Shock configuration (+ -> -)
The shock configuration is the energy pathway between the
defibrillation electrodes. If an atrial coil is present, the shock
configuration can be programmed for bi-directional shocks.