User's Manual

7
CPR4 – UA10821A
2 WARRANTY CONDITIONS
The manufacturer agrees to replace any defective material.
If a technical problem occurs, please contact your company representative or the company’s service
department.
WARNING: Never modify the configuration of the CPR4.
The CPR4 contains no internal parts that can be repaired by the user. In the event of a problem, please return the
equipment to your company representative in the condition in which it was received.
The manufacturer waives all responsibility if a malfunction occurs following manipulation by the user as described
above.
3 PACKAGE CONTENTS
Inside the box you will find the CPR4 and the related documentation
4 DESCRIPTION
The programming head provides inductive communication between the programmer and the implanted cardiac
device.
For detailed information about the compatibility of programming devices and implantable patient devices, please
refer to the Device-Compatibility-Matrix that is available under the reference number UA193 at
www.microportmanuals.com.
The inductive programming head is used to:
 activate the telemetry,
 identify the implanted device model,
 conduct telemetry in order to communicate with the implanted device when telemetry is performed in
inductive mode.
WARNING: there is no magnet in the head. However, it may temporarily disturb the rate response function
during interrogation.
4.1 COMPONENTS
2
2
Images and diagrams are non-contractual and are for illustrative purposes only.