User's Manual

14
CPR4 – UA10821A
7.7 Raw materials
Item
Material
Description
Plastic parts
Cycoloy C2100 HF (ABS/PC, UL 94
V-0, White RAL9016)
POLYCARBONATE ABS (ABS-
PC) White for outer parts and
grey for the middle part
Label
Glossy white polyester B423
POLYESTER
Main cable
Polyurethane (UL 94 V-2)
PU
Non-slip pad
Polyurethane Bumpon SJ6032
Black
PU
8 TECHNICAL DATA
8.1 Conformity of the device
Conformity with European Regulation and Directive(s)
MDR 2017/745, 2014/53/EU
2012/19/EU (WEEE)
2011/65/EU (RoHS)
Regulation (EC) 1907/2006 (REACH)
Patient safety
IEC 60601-1, Class I, BF Type
EMC
IEC 60601-1-2
EN 301 489-1
EN 301 489-31
ERM
EN 302-195
EN 62311: 2020
FCC CFR 47
8.2 FCC
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation of the device.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: This equipment may not be modified, altered, or changed in any way without signed written permission
from MicroPort CRM. Unauthorized modification may void the equipment authorization from the FCC and will void the
MicroPort CRM warranty.