assembly Instructions
SOREX wireless Solutions GmbH
Technologie- und Forschungszentrum
Viktor-Kaplan-Straße 2,B
2700 Wiener Neustadt, Österreich
UID ATU57865279
Bank Raiffeisenbank Pittental
IBAN AT223264700000052324
BIC RLNWATW1647
T +43 2622 320130
F +43 2622 3201315
@
w³ www.sorex-schliesssystem.com
SOREX wireless Solutions GmbH
Technologie- und Forschungszentrum
Viktor-Kaplan-Straße 2,B
2700 Wiener Neustadt, Österreich
UID ATU57865279
PayPal paypal@sorex-schliesssystem.com
Bank Raiffeisenbank Pittental
IBAN AT223264700000052324
BIC RLNWATW1647
Wir möchten Ihnen Türen öffnen
T +43 2622 32013-0 F -15
@
w³ www.sorex-schliesssystem.com
V1.0
21.04.2017
SOREX FLEX - Keypad & RFID cylinder
Instruction manual
This document is addressed to users of the SOREX FLEX - Keypad & RFID cylinder, and helps them with the initial installation and usage of the
product.
Product properties
Voltage supply
3xAAA Batteries
Operating temp.
-40°C–80°C
User memory
10 keypad codes &
20 RFID devices
Lifetime Keypad
10 mil. operations
Lifetime Battery
1 year
Weight
500g
Minimum length
Outside: 40 mm
Inside: 30 mm
Maximum length
Outside: 60 mm
Inside:65 mm
Items delivered
Qty.
Name
Image
1
SOREX FLEX
digital cylinder
1
Screwdriver
Product description
Installation of battery
1.
Remove locating screw from outer
knob.
2.
Remove sleeve and open the
housing for the batteries. Insert 3 x
AAA batteries. The cylinder is
reassembled in reversed order.
Adjusting the outer knob
1.
Open the battery housing as
described above.
2.
Remove screw in the middle of the
battery housing.
3.
Fit the outer knob on the spindle at
your desired position. The cylinder is
reassembled in reversed order.
Installation
1.
Remove screw on inner knob.
2.
Remove inner knob.
3.
Insert cylinder into the lock. The
position of the cylinder in the lock is
correct when the latch can be
operated via the spindle of the
cylinder.
4.
Fixate cylinder in the lock with a
centering screw.
5.
Fit the inner knob on the spindle at
your desired position.
Operation
Note: There can be up to 10 codes and 20
RFID devices linked to the digital cylinder.
There can only be one administrator code.
Note: Keypad codes have to be at least 6
digits long.
Note: Before an administrator code has
been configured, the cylinder is in delivery
condition. While in delivery condition, it is
always possible to cause an opening
action with the combination 123456 or
any RFID medium.
1.
Configure administrator code
Note: The cylinder has to be in delivery
condition, before an administrator code
can be configured
Press any key on the keypad. The
keypad lights up.
Press the key and enter the
combination 123456. Confirm your
entry with . The keypad flashes
seven times.