Installation & Assembly

ManualsBrandsSorelle ManualsBaby & KidsPrinceton 36'' Wide

By Sorelle - A Division of C&T International, Inc.

46 Whelan Road, East Rutherford, NJ 07073 U.S.A.

Tel, 201/531 1919 Fax, 201/531 1920

Front Top Bar

Front Middle Bar

Back Top Bar

Back Down Bar

Front Middle Bar

Front Down Bar

Tool required

PRINCETON ELITE 4 DRAWER CHEST

WEBSITE: www.sorellefurniture.com

Bolts 1/4”x28mm

=6pcs

Drawer screw #8*25mm

=32pcs

Bolts

1/4”x 45mm

=12pcs

d: Back Panel screw #8*15mm =40pcs

e: Machined screw 20mm =

8pcs

10*30mm Wood Dowel =14pcs

Allen key

=1pcs

g: Knob

= 8pcs

i: Metal Connector A =4pcs

j: Metal Connector B =4pcs

Drawer Screw

=12pcs

l: Wall Strap Kit =1pc

m: 8*40mm Wood Dowel =4pcs

n: 6*30mm Wood Dowel =22pcs

Summary of content (8 pages)

PAGE 1
PRINCETON ELITE 4 DRAWER CHEST By Sorelle - A Division of C&T International, Inc. 46 Whelan Road, East Rutherford, NJ 07073 U.S.A. Tel, 201/531 1919 Fax, 201/531 1920 WEBSITE: www.sorellefurniture.com Front Top Bar Front Middle Bar Front Middle Bar Front Down Bar Back Top Bar Back Down Bar O. P. y.
PAGE 2
1 Front Top Bar 2 Front Middle Bar 1 Front Down Bar 1 Back Top Bar 2 Back Panel P 1 Front Middle Bar I 2 Back Dwon Bar
PAGE 3
PAGE 4
If you have missing parts or questions... If a part is missing or you have questions, call us. DO NOT return product or parts to store from where it was purchased before calling us at: (201)-531-1919 Our service is fast, free and easier than returning the product.
PAGE 5
Use 6pcs Bolts ( a ) attach the Bar ( D&F&E&G&H&I ) to attach the Left Side Panel ( B ). As shown in Figure 1. B D E B C a h a a F E a B a G D H a Figure 2 f a F E G I n f Use 6pcs Bolts ( a ) attach the Bar ( D&F&E&G&H&I ) to attach the Right Side Panel ( C ). As shown in Figure 1. Figure 1 Step 3 Use 6pcs Bolts ( b ) attach the Top Panel (A) As shown in Figure 3&3a.
PAGE 6
Step 4 A Attach the Back Panel(N) with 40pcs wood screw( d ), As shown in Figure 4. J J d Figure 4 B Step 5 W orking on a padded flat surface, attach Drawer Sides Panel (L & M) to Drawer Back Panel(N) with 4pcs Wood screw( c ) and 2 pcs Wood Dowel(n). As shown in Figure 5.
PAGE 7
Step 6 L O N M P Insert 1 pc Wood Dowel (n) into the hole of Side Panels (M&L). As shown in Figure 6. L N O M P n Figure 6 Step 7 Secure both sides of Drawer Front ( K ) to drawer assembly with 4pcs wood screw( c ). As shown in Figure 7 Check all screws for tightness.
PAGE 8
Step 8 (k) Attach Matel Connector A (i)and Matel Connector B ( j ). Figure 8 (k) (i) (k) (j) Figure 8 e e K g g Insert 2pcs 1” Bolt(e) through the Drawer. g K As shown in Figure 9 Repeat steps 5 through 9 to assemble all 4 drawers.