Instructions / Assembly

Double Hammock with Steel Stand
PACKAGE INCLUDES:
(2) Base feet
(4) Plastic feet caps
(1) Base frame
(2) Hammock support frames
(2) Hammock attachment hooks, curved washer &
wing nut set
(2) Bolts, (nut & washer set connects hammock
support frame to base frame)
(2) Bolts, (nut & washer set connects base frame to
base feet)
ASSEMBLY INSTRUCTIONS:
Step 1
Determine a location. Make sure all parts are present
and place them side by side for easy identification. Use
Figure 1 as a guide for the following steps, taking note
of the washer position and order of assembly.
Step 2
Locate the four plastic feet caps and the two base feet.
Slide the plastic feet caps over the ends of the base feet
ensuring they are securely in position.
Step 3
Locate the base frame and the two base feet. Connect
together ensuring the U bolts are securely fastebed into
position.
Step 4
Locate the two hammock support frames and connect
these wih the base frame assembly. Ensure the bolts
are securely fastened into position.
Step 5
Position the hook into the hole towards the top of the
hammock support frame. Select the correct hole appro-
priate to the hammock size.
Step 6
Position the curved washer and fasten the wing nut to
the threaded bolt end of the hook.
Step 7
Attach the hammock to the hook as shown in Figure 2.
To confirm the hook is positioned into the correct hole
during step 4, test the hammock so when fully loaded
the hammock forms a natural curve shape, with the
lowest point being a minimum of 40cm above the
ground. As the hammock stretches with use, adjust
accordingly.
INSTALLATION AND WARNINGS-
Hammocks are portable and are not designed as a permanent structure. Continued
exposure to sunlight and rain will cause the hammock to deteriorate and weaken.
Before each use, make sure the attachment points are secure, the frame assembly
is structually firm, and all nuts and bolts remain tight. When entering the hammock,
always sit or lie on the hammock in the middle, never stand on the hammock.
Children must be accompanied by an adult at all times. Avoid wearing any shoes
or clothing with sharp or protruding objects that may damage or tangle with the
hammock. It is not necessary to apply any excessive force to achieve any of the
above steps. Excessive force will result in damage to the frame or the hammock,
and is not covered by warranty.
PLEASE NOTE- Accessories shown may be for display purposes only and not
included with the product. Due to our policy of continual product development,
specifications and features of this product may vary from what is stated.
DISASSEMBLY INSTRUCTIONS- To pack away, simply reverse the above process.
Prior to each use of your hammock, inspect the ropes and other materials in your
hammock, the mounting hardware, installation points, posts, trees, stand or studs from
which the hammock is hung for signs of wear or weakness.
Visit us online:
Please visit our website at www.sorbushouseware.com for the latest products.
Figure 1
Figure 2

Summary of content (1 pages)