User's Manual

Operating Instructions
11Wireless Access Points
AP 55C
Scope of supply
Important note: Sophos AP 55C requires Sophos UTM V 9.308 to be installed.
Mounting instructions
The Sophos AP 55C can be mounted on the ceiling. Screws are included in delivery.
Use the screws from the scope of supply or screws whose dimensions correspond
with the mounting holes in the bracket.
1. Mount the bracket on the ceiling
Use the screws and anchors from the scope of supply.
2. Place the access point on the bracket
Place the housing on the bracket and lock it by turning clockwise until stop.
Controls
LED
Green - blinking slowly AP is booting
Green - blinking rapidly Network connectivity
Orange - blinking slowly No connection to the Sophos UTM
Orange - blinking rapidly Firmware update
Interfaces and buttons
12V DC-IN Power
LAN (PoE) 10/100/1000 Base-TX interface
Power1 x 10/100/1000 Base-TX
Security Notes Ethernet cableSophos AP 55C Mounting bracket
Screws and
T-rail clips
Power-over-Ethernet (PoE)
injector + power cord