Owner's Manual

11
CLEANING & STORAGE
RUNNING THE HEATWAVE
TM
SESSION, CONT.
Tap ‘Stop’ to end the
HeatWave
TM
Session
Stopping the HeatWave Session
The Soovu Pods will automatically stop heating after 10, 20, or 30
minutes depending on the duration of the session you selected.
You can end the HeatWave session at any point by tapping the
'Stop' button at the bottom of the screen.
When the HeatWave session is over, the Pods will enter a 5 minute
cool down period. Many users get several hours of relief from
one session. During the cool down, evaluate how you feel before
beginning another session.
If the Soovu Pod(s) feels uncomfortably hot,
reduce the temperature or simply remove the
Pod(s) from your body and stop the session.
To avoid possible skin irritation, Adhesive Rings should be removed within
24 hours of initial application.
Removing the Soovu Pods
When you are ready to remove your Pods, pull each Soovu Pod o its Adhesive Ring and store it in a safe
place, ideally back on the Charging Cradle.
When you are ready to remove the Adhesive Ring from your body, carefully peel it away from your skin
and throw it out in the household trash. If there is a metal recycling program in your location, you may be
able to recycle the metal ring. Check with your local recycling program to confirm.
To clean your Soovu Pods, wipe them o with a damp cloth. It is not necessary to use cleaning solutions.
The Soovu Pods should not be submerged in water; however, the Pod is tested for accidental submersion
to 1 meter for up to 30 seconds. Do not use your Soovu Pods until they are completely dry.
To clean your Charging Cradle and Cable, unplug them and wipe them with a dry cloth.