User's Guide

14 15

Warning Change the battery in a clean dry environment to prevent water/ ingress from

entering the pump case. The battery cap is correctly installed with a push and turn

counter clock-wise to locked. This prevents water/ingress.

Warning

Notice

• The Diabecare DANA-i Insulin Pump is powered by an external (AAA) Battery

Notice

• SOOIL recommend using either a Duracell alkaline AAA battery or an ‘Energiser

Advanced’ alkaline AAA battery.

Caution The pump required one AAA 1.5V battery. Use a new AAA alkaline battery. Do

not use a carbon zinc battery in your pump. Carbon zinc batteries are not compatible

with this pump.

Caution Lithium batteries are not recommended as the battery level indicator may not

be accurate.

Caution

• DO NOT attempt to change the battery while a bolus is in progress.

• Dispose of used batteries in an environmentally friendly way according to local

disposal requirements or contact your local insulin pump distributor for disposal

information.

• It is recommended to keep a spare battery as backup.

• For accurate reading of the remaining battery charge, check the battery display

following the delivery of a bolus

Caution

Insulin Pump

1. Open the battery cap by inserting the

into the battery cap slot and turning

clock-wise ¼ turn.

2. Insert the battery with the positive at

top and insert the (-) into the Insulin

Pump.

3. Replace the battery cap turning it

counter clock-wise.

4. Completed when the cap is tightly

locked with insulin pump.

2. Installing a battery

Battery Cap

With O-ring