User Guide

YY2079C
5-045-380-11(1)
5-045-380-11(1)
Sound Bar
Barre de son
HT-S2000 Model, Modèle, Modelo: YY2079C
https://rd1.sony.net/help/ht/2079/h_zz/
©2022 Sony Corporation
Printed in China
Imprimé en China
https://www.sony.net/
Reference Guide GB
Guide de référence FR
Guía de referencia ES
English
Before using the unit, be sure to read the End User License Agreement (EULA) supplied with the unit.
The content of the agreement also applies to speakers (available separately) connected to the unit
(unless those speakers have a separate license agreement).
Model: YY2079C
The term “product” in this document refers to the unit or its accessories.
Owner’s Record
Record the serial number in the space provided below. Refer to them whenever you call upon your Sony
dealer.
Model No. HT-S2000
Serial No. __________________
The model and serial numbers are located on the following:
• the bottom of the unit
Do not install the product in a confined space, such as a bookcase or built-in cabinet.
To reduce the risk of fire, do not cover the ventilation opening of the unit with newspapers, tablecloths,
curtains, etc. Do not expose the unit to naked flame sources (for example, lighted candles).
To reduce the risk of fire or electric shock, do not expose this product to dripping or splashing, and do
not place objects filled with liquids, such as vases, on the product.
The AC adaptor is not disconnected from the AC power source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned off.
As the main plug of the AC adaptor is used to disconnect the AC adaptor from the mains, connect it to
an easily accessible AC outlet. Should you notice an abnormality in it, disconnect it from the AC outlet
immediately.
For Remote Commander
CAUTION
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Do not expose the batteries (battery pack or batteries installed) to excessive heat, such as sunshine, fire
or the like for a long time.
This product (including accessories) has magnet(s) which may interfere with pacemakers,
programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this
product close to persons who use such medical devices. Consult your doctor before using this product if
you use any such medical device.
The nameplate and important information concerning safety are displayed on the bottom of the
following:
• the bar speaker
• the AC adapter
For customers in the U.S.A.
NOTE:
This unit has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This unit generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this unit
does cause harmful interference to radio or television reception, which can be determined by turning
the unit off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the unit and receiver.
• Connect the unit into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Properly shielded and grounded cables and connectors must be used for connection to host computers
and/or peripherals in order to meet FCC emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
If you have any questions about this product:
Visit: https://www.sony.com/electronics/support
Contact: Sony Customer Information Service Center at 1-800-222-7669
Write: Sony Customer Information Service Center 12451 Gateway Blvd., Fort Myers, FL 33913
Supplier’s Declaration of Conformity
Trade Name: SONY
Model: YY2079C
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
You are cautioned that any changes or modifications not expressly approved in this manual could void
your authority to operate this unit.
This unit must not be co-located or operated in conjunction with any other antenna or transmitter.
This unit complies with FCC radiation exposure limits set forth for an uncontrolled environment and
meets the FCC radio frequency (RF) Exposure Guidelines. This unit should be installed and operated
keeping the radiator at least 20 cm or more away from person’s body.
Compliance with FCC requirement 15.407(c)
Data transmission is always initiated by software, which is passed down through the MAC, through the
digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC.
These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns
off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned
packets is being transmitted. In other words, this unit shall automatically discontinue transmission in
case of either absence of information to transmit or operational failure.
Frequency Tolerance: ±20 ppm
For customers in Canada
This unit contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This unit may not cause interference; and
(2) This unit must accept any interference, including interference that may cause undesired operation
of the unit.
This unit complies with ISED radiation exposure limits set forth for an uncontrolled environment and
meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This unit should be installed and
operated keeping the radiator at least 20 cm or more away from person’s body.
5 150 MHz – 5 350 MHz band is restricted to indoor operations only.
Data transmission is always initiated by software, which is passed down through the MAC, through the
digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC.
These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns
off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned
packets is being transmitted. In other words, this unit shall automatically discontinue transmission in
case of either absence of information to transmit or operational failure.
About recommended cables
Properly shielded and grounded cables and connectors must be used for connection to host computers
and/or peripherals.
Mounting the Bar Speaker on a Wall
Note
• Prepare screws (not supplied) that are suitable for the wall material and stability. Depending on the
wall material, the wall may be damaged.
• Fasten the screws securely in the wall beam.
• Hang the bar speaker horizontally on the reinforced wall.
• Have the installation done by a Sony dealer or licensed contractor and pay special attention to safety
during the installation.
• Sony shall not be held responsible for accidents or damage caused by improper installation,
insufficient wall stability, improper screw installation, natural disasters, etc.
• Two or more persons are required to hang the bar speaker for safety.
1 Prepare two screws (not supplied) that are suitable for the wall mount holes on the rear of the bar
speaker.
4 mm (3/16 in)
Hole on the rear of
the bar speaker
More than 30 mm (1 3/16 in)
5.1 mm (7/32 in)
10 mm (13/32 in)
2 Align the vertical line above the “
 TV CENTER LINE” printed on the WALL MOUNT TEMPLATE
(supplied) with the center of the width of your TV.
Center of the TV
WALL MOUNT
TEMPLATE
Adhesive
tape, etc.
3 Align the “
 TV BOTTOM LINE” printed on the WALL MOUNT TEMPLATE with the bottom of your
TV, then adhere the WALL MOUNT TEMPLATE on the wall with a commercially available adhesive
tape, etc.
4 Fasten the screws prepared in step 1 securely into the screw marks on the “
 SCREW LINE” printed
on the WALL MOUNT TEMPLATE.
254 mm (10 in) 254 mm (10 in)
Marks
Screws
9.5 mm to
10.5 mm
(approx.
13/32 in)
5 Remove the WALL MOUNT TEMPLATE.
6 Connect cables to the bar speaker.
 Connect the HDMI cable (supplied) to the HDMI OUT (TV eARC/ARC) jack on the bar speaker.
 Connect the AC adaptor (supplied) to the DC IN terminal on the bar speaker and then the AC
power cord (mains lead) (supplied) to the AC adaptor.
Note
• If your TV is not compatible with ARC or eARC, connect the optical digital cable (not supplied)
besides the HDMI cable (supplied).
• For TV connections, refer to Help Guide.
7 Hang the bar speaker on the screws.
Align the holes of the rear of the bar speaker with the screws, then hang the bar speaker on the two
screws.
Note
• When adhering the WALL MOUNT TEMPLATE on the wall, smooth it out fully.
• Install the bar speaker apart from the TV by 70 mm (2 7/8 in) or more.
8 Connect the HDMI cable (supplied) to the HDMI IN jack on the TV.
9 Connect the AC power cord (mains lead) connected with the bar speaker to the AC outlet (mains).
Licenses
• Dolby, Dolby Atmos, Dolby Audio, and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Manufactured under license from Dolby Laboratories. Confidential unpublished works.
Copyright © 1992–2021 Dolby Laboratories. All rights reserved.
• For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS, Inc. DTS, DTS:X, and the DTS:X logo are registered
trademarks or trademarks of DTS, Inc. in the United States and other countries. © 2022 DTS, Inc.
ALL RIGHTS RESERVED.
• This product is protected by certain intellectual property rights of Microsoft Corporation. Use
or distribution of such technology outside of this product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
• This product contains software that Sony uses under a licensing agreement with the owner of
its copyright. We are obligated to announce the contents of the agreement to customers under
requirement by the owner of copyright for the software. Please access the following URL and
read the contents of the license.
https://rd1.sony.net/help/ht/sl/v1/23/
• The software included in this product contains copyrighted software that is licensed under the
GPL/LGPL and other licenses which may require access to source code. You may find a copy of
the relevant source code as required under the GPL/LGPL (and other licenses) at the following
URL.
You may obtain the source code as required by the GPL/LGPL on a physical medium from us for
a period of three years after our last shipment of this product by applying through the form at
the following URL.
This offer is valid to anyone in receipt of this information.
https://oss.sony.net/Products/Linux/
Please note that Sony cannot answer or respond to any inquiries regarding the content of this
source code.
Disclaimer regarding services offered by third parties
• Services offered by third parties may be changed, suspended, or terminated without prior
notice. Sony does not bear any responsibility in these sorts of situations.
Precautions
• Before operating the unit, check that the operating voltage is identical to your local power supply.
The operating voltage is indicated on the nameplate on the bottom of the unit.
• The supplied AC adaptor is designed exclusively for this unit. It should not be used in combination
with any other devices.
• Completely disconnect the AC power cord (mains lead) from the AC outlet (mains) if it is not going to
be used for an extended period of time. When unplugging the AC power cord (mains lead), always
grip the plug. Never pull the cord itself.
• One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet
(mains) only one way. If you are unable to insert the plug fully into the outlet, contact your dealer.
• AC power cord (mains lead) must be changed only at a qualified service shop.
On placement
• Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified
personnel before operating it any further.
• Do not place the unit near heat sources or in a place subject to direct sunlight, excessive dust, or
mechanical shock.
• The speakers of this unit are not of magnetically shielded type. Do not place magnetic cards on the
unit or near it.
• Do not place metal objects other than a TV around the unit. Wireless functions may be unstable.
• Although the unit heats up during operation, this is not a malfunction.
• Place the unit in a location with adequate ventilation to prevent heat buildup and prolong the life of
the unit.
• Use caution when placing the unit on a surface that has been specially treated (with wax, oil, polish,
etc.), as staining or discoloration of the surface may result.
How to care for the unit
• Clean the unit with a soft, dry cloth. Do not use any type of abrasive pad, scouring powder, or solvent
such as alcohol or benzine.
On BLUETOOTH® communications
• Microwaves emitting from a BLUETOOTH device may affect the operation of electronic medical
devices. Turn off this unit and other BLUETOOTH devices in the following locations, as it may cause
an accident:
– in hospitals, near priority seating in trains, locations where inflammable gas is present, near
automatic doors, or near fire alarms.
Other notes
• You can add new features and use the unit with more convenience and safety by updating the unit.
For details, refer to Help Guide.
• Deactivating the auto standby function will increase the energy consumption of the product.
• When connecting the unit to the Internet, use the router (ADSL modem or optical line termination
device with the router function supplied with the Internet provider, or Wi-Fi access point). If you
connect to the Internet without using the router, a security problem may occur. If you are not sure
that the wall outlet for the network line has the router function, ask your manager of the apartment
house or Internet provider.
• If you have any questions or problems concerning this unit that are not covered in this manual,
please consult your nearest Sony dealer.
Trademarks
• Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United
States and/or other countries.
• The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by Sony Group Corporation and its subsidiaries is under license.
• The terms HDMI™, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing Administrator, Inc.
All other trademarks and registered trademarks are trademarks or registered trademarks of their
respective holders. In this manual, TM and ® marks are not specified.
Specifications
Sound Bar (HT-S2000)
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (FTC)
Front L + Front R:
With 6 ohms loads, both channels driven, from 20 - 20k Hz; rated 33 W per channel minimum RMS
power, with no more than 1% total harmonic distortion from 250 mW to rated output.
Canadian models:
POWER OUTPUT (rated)
Front L + Front R speaker blocks: 37 W + 37 W (at 6 ohms, 1 kHz 1 %THD)
Center speaker blocks: 37 W (at 6 ohms, 1 kHz 1 %THD)
Subwoofer blocks: 37 W+37 W (at 6 ohms, 100 Hz 1 %THD)
POWER OUTPUT (reference)
Front L/Front R speaker blocks: 50 W (per channel at 6 ohms, 1 kHz)
Center speaker blocks: 50 W (at 6 ohms, 1 kHz)
Subwoofer blocks: 50 W (per channel at 6 ohms, 100 Hz)
HDMI Section
Connector
Type A (19pin)
USB section
(USB) port: 1000 mA
Type A (For connecting USB memory)
Wireless LAN section
Communication system
IEEE 802.11 a/b/g/n/ac
Frequency band
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 5.2
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
General
Power requirements
DC 25 V (using the supplied AC adaptor connected to AC 100 V - 240 V, 50 Hz/60 Hz power supply)
Power consumption
On: 35.9 W
[Network/Bluetooth Standby] - [On]: Less than 2 W
[Network/Bluetooth Standby] - [Off]: Less than 0.5 W*
* When [Standby Through] is set to [Off], or [Standby Through] is set to [Auto] while the connected
TV is turned off.
Dimensions* (approx.) (w/h/d)
800 mm × 64 mm × 124 mm (31 1/2 in × 2 5/8 in × 5 in)
* Not including projection portion
Mass (approx.)
3.5 kg (123.5 oz)
Wireless Transmitter/Receiver Section
Communication system
Wireless Sound Specification version 4
Frequency band
5 GHz
Included Items
• Sound Bar (1)
• Remote control (1)
• R03 (size AAA) battery (2)
• WALL MOUNT TEMPLATE (1)
• HDMI cable (supports the specification equal to High Speed HDMI Cable with Ethernet) (1)
• AC adaptor (1), AC power cord (mains lead) (1)
• Reference Guide
Design and specifications are subject to change without notice.
Français
Español