Owner's Manual
Table Of Contents
- Installation Information
- Before Getting Started
- Installing the Lateral Shift Bracket to the Wall
- Preparing for the Installation of the TV
- Installing the TV on the Wall
- Confirming the Completion of the Installation
- Installing the Wall-Mount Bracket to the Wall
- Preparing for the Installation of the TV
- Installing the TV on the Wall
- Confirming the Completion of the Installation
- Specifications
- References
- Setup Guide
- Reference Guide
- Displaying the TV program
- Safety and Regulatory Booklet
- End User License Agreement
- Warranty
- Child Safety
− 9 (US) −
US
5 Install
WM4
on the wall.
× 2
WW1WS2 WM4
Note
Use a level to check whether
WM4
is level.
Precaution
Do not over-tighten the lag bolts
WS2
. Improper
tightening could reduce the holding power of the
lag bolts
WS2
.
6 Drill lower pilot holes on the
marks. (Refer step 4 for the drill
instruction.)
× 2
7 Fit the screws and spacers to the
holes.
WS2
WW1
× 2
Note
Use a level to check whether
WM4
is level.
8
WM1
WW2
WS1
9 Pull out the arm of the bracket to
the end.
Preparing for the Installation
of the TV
Note
Be sure to store the removed screws and unused parts
in a safe place, keeping them away from children.