Specification Sheet

600 W x1 RMS output power at 4 ohms

1,000 W x1 RMS output power at 2 ohms

Resonance-damping compact and sturdy aluminum case

Combined Pre-outs for more installation options

Updated connection terminal/control panel design, and supplied bass remote

XM1ES

Mobile ES™ Mono Power Amplifier

XM-1ES Mobile ES™ Mono Power Amplifier gives you powerful and clean low-

end from a sturdy, compact aluminum body. Precisely customize it to your

requirements and taste, with optimally designed connection terminals, an

extensive control panel, and an external remote control for bass adjustment. The

new pre-out allows even more installation flexibility by either combining two input

channels into a single output, or passing through in stereo, for connection to

additional amplifiers.

Bullets

Specification

Amplifier

Channel Configuration 1-ch (Mono)

Low Pass Filter Variable (50–500 Hz)

Low-Pass Filter Slope 24 dB/oct

CTA Rated Output

Power

4 ohms 600 W x1

Details

CEA Power output 600 W x1

CEA SN Ratio 93 dB or higher

Gold Plated Connectors Yes

MOSFET Yes (Power Supply)

Speaker Level Input Yes

Subsonic High Pass Filter Yes

General Features

PAGE 1
XM1ES Mobile ES™ Mono Power Amplifier XM-1ES Mobile ES™ Mono Power Amplifier gives you powerful and clean lowend from a sturdy, compact aluminum body. Precisely customize it to your requirements and taste, with optimally designed connection terminals, an extensive control panel, and an external remote control for bass adjustment.
PAGE 2
Frequency Response 10–500 Hz Signal to Noise Ratio 100 dB Tolerance +0.5/-3 dB Total Harmonic Distortion at 1 kHz (%) Less than 0.05% Maximum Output Power (1 kHz) Max. Channel Output Power 1,000 W Configuration at 4 ohm Max. Channel Power Configuration at 2 ohms 1,550 W Rated Output Power (14.4 V) 2 ohms 1,000 W x1 at 100 Hz, 1% THD 4 ohms 600 W x1 at 100 Hz, 1% THD Size & Weight Dimensions (W x H x D) 10.63" x 2.36" x 8.46" Weight 6.39 lb 1.