User guide
Table Of Contents
- OPERATING INSTRUaiONS MANUAL DE INSTRUCCIONES MODE D'EMPLOI
- BEFORE USE
- HANDUNG AND CLEANING
- PARTS AND CONTROLS
- CONNECTIONS
- Connecting to a TV set only
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- ^ Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- Q Connecting to a decoder with DTS processing or an AV amplifier equipped with a DTS decoder
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- 2 Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- CONNECTIONS (CONTINUEO)
- PLAYBACK (THE BASICS)
- PUYBACK (CONTINUED)
- Slow Playback (DVD, video CD)
- Press ◄◄or is paused.
- while disc
- Fast Forward, Reverse (DVD, video CD, audio CD)
- Press
- ^^ playback.
- or
- during
- Skipping (DVD, video CD, audio CD)
- Press ¡◄◄PREVIOUS or ►MNEXT during piayback.
- Enlarge the picture - Zoom function (DVD)
- Q Press ZOOM during playback
- rn Pfess SET UP during playback
- PlayBack
- Q Press PBC after loading a disc (either when stopped or during playing)
- PLAYBACK (CONTtNUED)
- ARCH - BEGIN DVD PLAYBACK AT ANY DESIRED LOCATION
- PROGRAMMED PLAYBACK - PLAY AN AUDIO OR
- I REPEAT PUYBACK
- REPEATING A DVD
- Q Press REPEAT during playback.
- REPEATING A VIDEO CD/AN AUDIO CD
- Q Press REPEAT.
- REPEATING A SECTION BETWEEN TWO SPECIFIED POINTS (A-B REPEAT)
- I During playback, press A-B at the ^ ^ , starting point of the section you want to o Q repeat. ^
- 2 Press A-B again at the ending point of the section you want to repeat.
- CHANGING THE ANGLE ‘ ISKST ™"'
- DISPLAYING AND CHANGING SDBTITIES
- CHANGING THE AUDIO TRACK
- CHANGING SETUP VALUES
- I Press SETUP while the player is stopped.
- 2 Use AT to move the cursor (the yellow area) to the setting to be changed.
- 3 Press ENTER.
- Basic operations
- On-screen Menu
- Disc Languages
- Audio Output Setting
- Rating Limit
- [7]Press ENTER.
- [Tj At the initial setting screen, select “Rating Limit” by using AV. Then press ENTER.
- H] Press ENTER.
- ] Press ENTER.
- If you forget the password
- After confirming the password, press ENTER again.
- [9] Press o*^RETURN to return to the previous screen or press SETUP to exit the setup menu.
- To change the settings
- [T] At the initial setting screen, select “Ratings” by using AT. Then press ENTER.
- [sjChange the contents you would like to set, and press ENTER.
- [6] Press ENTER.
- [^After confirming the password, press ENTER again.
- Disc Resume
- Demonstration
- Country codes
- Language codes
- TROUBLESHOOTING
- SPECIFICATIONS
- ANTES DEL EMPLEO
- MANEJO Y LIMPIEZA
- COMPONENTES Y CONTROLES
- ' CONEXIONES
- Antes de realizar las conexiones
- PRECAUCION
- Conexión a un TV solamente
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- ’ CONEXIONES (CONTINUACIÓN)
- ‘reproducción (OPERACIONES BÁSICAS)
- Acerca de la indicación del símbolo 0
- Preparativos para la reproducción
- I Presione POWER en el reproductor DVD.
- 2 Presione AOPEN/CLOSE.
- 3 Introduzca un disco.
- 4 Presione AOPEN/CLOSE.
- Detención de la r video, CD de audii
- Presione ISTOP.
- Presione IIPAUSE/STILL dorante la
- reproducción.
- Avance de fotogramas (DVD, CD de video)
- Presione IIPAUSE/STILL mientras el disco se encuentra en el modo de pausa.
- REPRODUCCIÓN (CONTINUACIÓN)
- REPRODUCCIÓN (CONTINUACIÓN)
- BUSQUEDA - INICIO DE LA REPRODUCCIÓN DE
- Búsqueda de títulos
- Búsqueda de capítulos
- Búsqueda por tiempo
- Búsqueda de títulos (OVD)/Búsqueda de pistas (CD de video con PBC desactivada, CD de audio)
- I Presione T-SEARCH, bien durante la reproducción o la parada.
- Emplee los botones numéricos para introducir el número del título deseado.
- Presione ENTER o ►PLAY.
- DISCOS DVD EN EL PUNTO DESEADO
- REPRODUCCION PROGRAMADA - REPRODUCCIÓ
- REPRODUCCION REPETIDA
- CAMBIO DEL ANGULO
- VISUAUZACION Y CAMBIO DE StlÑTIYULOS
- CAMBIO DE LA PISTA DE AUDIO
- CAMBIO DE VALORES DE CONFIGURACION
- I Presione SETUP con el reproductor parado.
- Emplee AT para desplazar el cursor (área amarilla) hasta el ajuste que desee cambiar.
- 3 Presione ENTER.
- Operaciones básica
- On-screen Menu (Menú en pantalla)
- Guide Message (Mensaje guía):
- [l]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- Background (Fondo):
- [T]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- [3] Presione ENTER.
- [5] Presione ENTER.
- [3] Presione ENTER.
- Disc Languages (Idiomas de los discos)
- Audi
- alidi
- TV Aspect (Aspecto de TV
- Rating Limit (Límite de clasificación)
- Disc Resume (Reanud reproducción de disco:
- Demonstration (Demostración)
- Códigos de países
- Códigos de idiom
- SOLUCIÓN DE PROBLEMAS
- ESPECIFICACIONES
- * AVAMT L’UnllSATION
- MNIPULATION ET ENTffiTÎEN
- COMPOSANTS ET COMMANDES
- RACCORDEMENT
- Avant d’établir les connexions
- Raccordement à un téléviseu
- Raccordement à un téléviseur et à un système audi
- B Raccordement à un décodeur à traitement Dolby Digital ou à un amplificateur AV à décodeur Dolby Digital
- Q Raccordement décodeur DTS
- eur à traitement DTS ou à un amplificateur AV équipé d’un
- RACCORDEMENT (SUITE)
- LECTURE (OPÉRATIONS DE BASE)
- A propos de l’affichage du symbole 0
- Préparation
- I Appuyez sur le commutateur POWER du lecteur DVD.
- 2 Appuyez sur ±OPEN / CLOSE.
- 3 Placez un disque.
- 4 Appuyez sur ± OPEN / CLOSE.
- Arrêt de la lecture (DVD, CD vidéo, CD aud
- Q Appuyez sur ■ STOP.
- № Appuyez sur II PAUSE/STILL en
- ^ cours de lecture.
- Arrêt sur image (Pause) (DVD, CD vidéo, CD audio)
- Avance image par image (DVD, CD vidéo)
- Appuyez sur II PAUSE/STILL lorsque le disque se trouve en mode de pause.
- LECTURE (SUITE)
- LECTURE (SUITE)
- RECHERCHE - DÉMARRAGE DE lA LECTURE D’UN DVD
- Recherche de titre
- Recherche de chapitre
- Recherche temporeiie
- Recherche de titre (DVD)/ Recherche de plage (CD vidéo avec PBC désactivé, CD audio)
- I Appuyez sur T-SEARCH en mode de lecture ou d’arrêt.
- Utilisez les touches numériques pour introduire le numéro de titre voulu.
- 3 Appuyez sur ENTER ou ^PLAY.
- A UN ENDROIT DETERMINE
- LECTURE PROGRAMMEE - LECTURE D’UN CD AUDI
- ou VIDEO DANS UN ORDRE DETERMINE
- LfCIURE REPETEE
- CHANGEMENT D’ANGIT KSS'S'
- AFFICHAGE ET CHANGEMEHT DES SOUS-TITRES
- CHANGEMENT DE LA PLAGE AUDIO
- CHANGEMENT DES VAUURS DE REGUUiE
- Votre lecteur DVD est paramétré par défaut sur les valeurs
- I Appuyez sur SETUP alors que le lecteur se trouve en mode d’arrêt.
- Utilisez les touches AT pour déplacer le curseur (la zone jaune) sur le paramètre à modifier.
- 3 Appuyez sur ENTER.
- Opérations de bas
- Réglage de l’écran de menu
- tion de la langue d’affichage des disques
- Réglage de la sortie audio
- Réglage du format du télévise
- Réglage du niveau de limitation
- Réglage de la fonction de commande de H Réglage de la fonction de reprise de lecture lecture (PBC) H des disques
- Réglage du mode de démonstration
- Codes de pays
- Codes de langue
- dImnnage
Display panel
This player shows On-Screen Display messages on the screen of the TV set to which the DVD player is connected, as well as those
on the display panel of the unit.
The On-Screen Dispiay messages, which accompany each operation of the unit, make operation simpie and easy especiaiiy when
playing DVDs or video CDs. They are also displayed when pressing the DISPLAY button on the remote control.
The instructions in this manual refer mainly to the On-Screen Display messages.
® (D (D (4) (D (6)
Display symbols for DVDs
(2) DVD is displayed when a DVD disc is loaded.
(3) ANGLE is displayed when a multi-angle scene comes on
during playback.
(6) DTS is dispiayed when sounds recorded in DTS are played
back.
(7) DOLBY DIGITAL is dispiayed when sounds recorded in Dolby
Digital (AC-3) are played back.
Display symbols for video/audio CDs
0CD lights up when an audio CD is loaded, and VIDEO CD
lights up when a video CD is loaded.
(4) PBC (playback control) lights up when a video CD (version
2.0) with its PBC feature activated is ioaded.
(9)RANDOM lights up during random piay.
Display symbols for all discs
(5) RESUME indicates when the unit remembers the point at
which playback stopped on the inserted disc. Playback will
begin from this point.
@Q SURROUND iights up when the Q SURROUND is turned
on.
® The repeat playback indicators light up during repeat play.
The repeat playback cannot be performed for video CDs with
their PBC feature activated.
REPEAT: All the tracks on the disc are piayed back
repeatedly.
REPEAT 1: One track is played back repeatedly.
REPEAT A-B: A desired portion is piayed back repeatedly.
@The playback indicator rotates during playback.
©TheTITLE, TRK (title, track) number indicates;
- the number of the title being played during playback of a
DVD disc.
- the total number of tracks in stop mode and the number of
the track being played back in playback mode, when an
audio CD, a video CD (version 1.1) or a video CD (version
2.0 with the PBC feature disabied) is ioaded.
“PBC” is dispiayed here when a video CD (version 2.0) with
its PBC feature activated is ioaded.
©The CHP, INDEX (chapter, index) number indicates the
number of the chapter being played during playback of a DVD
disc.
©The time counter indicates;
- the total playing time of an audio CD or a video CD in stop
mode.
- the elapsed playing time or the remaining playback time of
the title/chapter/disc/track of an audio CD, a video CD or a
DVD in playback mode.
SET UP button is used to change the dispiay.
When a video CD with its PBC feature activated is loaded,
time indication does not appear.
©The registered track numbers are dispiayed (up to 16) in
stop mode during playback of an audio CD or a video CD.
The number of the track being played flashes during
piayback, and the track numbers already played back
disappear.
When a video CD with its PBC feature activated is loaded,
the track numbers do not appear.
ENGLISH 7