User guide
Table Of Contents
- OPERATING INSTRUaiONS MANUAL DE INSTRUCCIONES MODE D'EMPLOI
- BEFORE USE
- HANDUNG AND CLEANING
- PARTS AND CONTROLS
- CONNECTIONS
- Connecting to a TV set only
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- ^ Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- Q Connecting to a decoder with DTS processing or an AV amplifier equipped with a DTS decoder
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- 2 Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- CONNECTIONS (CONTINUEO)
- PLAYBACK (THE BASICS)
- PUYBACK (CONTINUED)
- Slow Playback (DVD, video CD)
- Press ◄◄or is paused.
- while disc
- Fast Forward, Reverse (DVD, video CD, audio CD)
- Press
- ^^ playback.
- or
- during
- Skipping (DVD, video CD, audio CD)
- Press ¡◄◄PREVIOUS or ►MNEXT during piayback.
- Enlarge the picture - Zoom function (DVD)
- Q Press ZOOM during playback
- rn Pfess SET UP during playback
- PlayBack
- Q Press PBC after loading a disc (either when stopped or during playing)
- PLAYBACK (CONTtNUED)
- ARCH - BEGIN DVD PLAYBACK AT ANY DESIRED LOCATION
- PROGRAMMED PLAYBACK - PLAY AN AUDIO OR
- I REPEAT PUYBACK
- REPEATING A DVD
- Q Press REPEAT during playback.
- REPEATING A VIDEO CD/AN AUDIO CD
- Q Press REPEAT.
- REPEATING A SECTION BETWEEN TWO SPECIFIED POINTS (A-B REPEAT)
- I During playback, press A-B at the ^ ^ , starting point of the section you want to o Q repeat. ^
- 2 Press A-B again at the ending point of the section you want to repeat.
- CHANGING THE ANGLE ‘ ISKST ™"'
- DISPLAYING AND CHANGING SDBTITIES
- CHANGING THE AUDIO TRACK
- CHANGING SETUP VALUES
- I Press SETUP while the player is stopped.
- 2 Use AT to move the cursor (the yellow area) to the setting to be changed.
- 3 Press ENTER.
- Basic operations
- On-screen Menu
- Disc Languages
- Audio Output Setting
- Rating Limit
- [7]Press ENTER.
- [Tj At the initial setting screen, select “Rating Limit” by using AV. Then press ENTER.
- H] Press ENTER.
- ] Press ENTER.
- If you forget the password
- After confirming the password, press ENTER again.
- [9] Press o*^RETURN to return to the previous screen or press SETUP to exit the setup menu.
- To change the settings
- [T] At the initial setting screen, select “Ratings” by using AT. Then press ENTER.
- [sjChange the contents you would like to set, and press ENTER.
- [6] Press ENTER.
- [^After confirming the password, press ENTER again.
- Disc Resume
- Demonstration
- Country codes
- Language codes
- TROUBLESHOOTING
- SPECIFICATIONS
- ANTES DEL EMPLEO
- MANEJO Y LIMPIEZA
- COMPONENTES Y CONTROLES
- ' CONEXIONES
- Antes de realizar las conexiones
- PRECAUCION
- Conexión a un TV solamente
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- ’ CONEXIONES (CONTINUACIÓN)
- ‘reproducción (OPERACIONES BÁSICAS)
- Acerca de la indicación del símbolo 0
- Preparativos para la reproducción
- I Presione POWER en el reproductor DVD.
- 2 Presione AOPEN/CLOSE.
- 3 Introduzca un disco.
- 4 Presione AOPEN/CLOSE.
- Detención de la r video, CD de audii
- Presione ISTOP.
- Presione IIPAUSE/STILL dorante la
- reproducción.
- Avance de fotogramas (DVD, CD de video)
- Presione IIPAUSE/STILL mientras el disco se encuentra en el modo de pausa.
- REPRODUCCIÓN (CONTINUACIÓN)
- REPRODUCCIÓN (CONTINUACIÓN)
- BUSQUEDA - INICIO DE LA REPRODUCCIÓN DE
- Búsqueda de títulos
- Búsqueda de capítulos
- Búsqueda por tiempo
- Búsqueda de títulos (OVD)/Búsqueda de pistas (CD de video con PBC desactivada, CD de audio)
- I Presione T-SEARCH, bien durante la reproducción o la parada.
- Emplee los botones numéricos para introducir el número del título deseado.
- Presione ENTER o ►PLAY.
- DISCOS DVD EN EL PUNTO DESEADO
- REPRODUCCION PROGRAMADA - REPRODUCCIÓ
- REPRODUCCION REPETIDA
- CAMBIO DEL ANGULO
- VISUAUZACION Y CAMBIO DE StlÑTIYULOS
- CAMBIO DE LA PISTA DE AUDIO
- CAMBIO DE VALORES DE CONFIGURACION
- I Presione SETUP con el reproductor parado.
- Emplee AT para desplazar el cursor (área amarilla) hasta el ajuste que desee cambiar.
- 3 Presione ENTER.
- Operaciones básica
- On-screen Menu (Menú en pantalla)
- Guide Message (Mensaje guía):
- [l]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- Background (Fondo):
- [T]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- [3] Presione ENTER.
- [5] Presione ENTER.
- [3] Presione ENTER.
- Disc Languages (Idiomas de los discos)
- Audi
- alidi
- TV Aspect (Aspecto de TV
- Rating Limit (Límite de clasificación)
- Disc Resume (Reanud reproducción de disco:
- Demonstration (Demostración)
- Códigos de países
- Códigos de idiom
- SOLUCIÓN DE PROBLEMAS
- ESPECIFICACIONES
- * AVAMT L’UnllSATION
- MNIPULATION ET ENTffiTÎEN
- COMPOSANTS ET COMMANDES
- RACCORDEMENT
- Avant d’établir les connexions
- Raccordement à un téléviseu
- Raccordement à un téléviseur et à un système audi
- B Raccordement à un décodeur à traitement Dolby Digital ou à un amplificateur AV à décodeur Dolby Digital
- Q Raccordement décodeur DTS
- eur à traitement DTS ou à un amplificateur AV équipé d’un
- RACCORDEMENT (SUITE)
- LECTURE (OPÉRATIONS DE BASE)
- A propos de l’affichage du symbole 0
- Préparation
- I Appuyez sur le commutateur POWER du lecteur DVD.
- 2 Appuyez sur ±OPEN / CLOSE.
- 3 Placez un disque.
- 4 Appuyez sur ± OPEN / CLOSE.
- Arrêt de la lecture (DVD, CD vidéo, CD aud
- Q Appuyez sur ■ STOP.
- № Appuyez sur II PAUSE/STILL en
- ^ cours de lecture.
- Arrêt sur image (Pause) (DVD, CD vidéo, CD audio)
- Avance image par image (DVD, CD vidéo)
- Appuyez sur II PAUSE/STILL lorsque le disque se trouve en mode de pause.
- LECTURE (SUITE)
- LECTURE (SUITE)
- RECHERCHE - DÉMARRAGE DE lA LECTURE D’UN DVD
- Recherche de titre
- Recherche de chapitre
- Recherche temporeiie
- Recherche de titre (DVD)/ Recherche de plage (CD vidéo avec PBC désactivé, CD audio)
- I Appuyez sur T-SEARCH en mode de lecture ou d’arrêt.
- Utilisez les touches numériques pour introduire le numéro de titre voulu.
- 3 Appuyez sur ENTER ou ^PLAY.
- A UN ENDROIT DETERMINE
- LECTURE PROGRAMMEE - LECTURE D’UN CD AUDI
- ou VIDEO DANS UN ORDRE DETERMINE
- LfCIURE REPETEE
- CHANGEMENT D’ANGIT KSS'S'
- AFFICHAGE ET CHANGEMEHT DES SOUS-TITRES
- CHANGEMENT DE LA PLAGE AUDIO
- CHANGEMENT DES VAUURS DE REGUUiE
- Votre lecteur DVD est paramétré par défaut sur les valeurs
- I Appuyez sur SETUP alors que le lecteur se trouve en mode d’arrêt.
- Utilisez les touches AT pour déplacer le curseur (la zone jaune) sur le paramètre à modifier.
- 3 Appuyez sur ENTER.
- Opérations de bas
- Réglage de l’écran de menu
- tion de la langue d’affichage des disques
- Réglage de la sortie audio
- Réglage du format du télévise
- Réglage du niveau de limitation
- Réglage de la fonction de commande de H Réglage de la fonction de reprise de lecture lecture (PBC) H des disques
- Réglage du mode de démonstration
- Codes de pays
- Codes de langue
- dImnnage
SPECIFICATIONS
Power supply
Power consumption
Weight
External dimensions
Signal format
Supported discs
S2 video output
Video output
120VAC, 60 Hz
29 W
5.3 kg (11.66 lbs)
430 X 105 X 360 mm (w x h x d)
(17x 4’/4 X 1 4V4 inches)
NTSC
DVD video discs
12 cm (single-sided single-layer, single
sided double-layer, double-sided-double
layer)
8 cm (single-sided single-layer, single
sided double-layer, double-sided-double
layer)
Compact discs (CD-DA, video CD)
12 cm and 8 cm discs
Y output: 1 Vp-p (75 ohms, sync negative)
C output: 0.286 Vp-p
Video composit output
1 Vp-p (75 ohms, sync negative)
Two RCA jacks
Video compornent output
Y output: 1 Vp-p (75 ohms, sync negative)
Pb,Pr output: 0.7 Vp-p (75 ohms)
DOWN MIXING AUDIO OUT connector
100 mV RMS(1 kHz,-20 dB)
2 RCA jacks (L/R)
Fiber optical connector (lEC 958)
Audio output characteristics
Frequency range:
CD / VCD: 20 Hz to 20 kHz
DVD: 4 Hz to 22 kHz (48 kHz sampling)
4 Hz to 44 kHz (96 kHz sampling)
Wow and flutter: unmeasurable
5’C to 35"C(41Tto95°F)
Video and audio connection cables (1 set).
Remote control (1)
Batteries (R6, size AA) (2)
Audio output
Operating conditions
Accessories
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi
cations. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user's right
or authority to operate this product.
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“Dolby" and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporations
Manufactured under license from Digital Theater Systems, Ino.
US Pat. No. 5,451,942 and other worldwide patents issued and
pending. “DTS” and “DTS Digital Surround” are trademarks of
Digital Theater Systems, Inc. ©1996 Digital Theater systems,
Ino. All rights reserved.
Specifications are subject to change without notice.
48 ENGLISH