User guide
Table Of Contents
- OPERATING INSTRUaiONS MANUAL DE INSTRUCCIONES MODE D'EMPLOI
- BEFORE USE
- HANDUNG AND CLEANING
- PARTS AND CONTROLS
- CONNECTIONS
- Connecting to a TV set only
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- ^ Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- Q Connecting to a decoder with DTS processing or an AV amplifier equipped with a DTS decoder
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- 2 Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- CONNECTIONS (CONTINUEO)
- PLAYBACK (THE BASICS)
- PUYBACK (CONTINUED)
- Slow Playback (DVD, video CD)
- Press ◄◄or is paused.
- while disc
- Fast Forward, Reverse (DVD, video CD, audio CD)
- Press
- ^^ playback.
- or
- during
- Skipping (DVD, video CD, audio CD)
- Press ¡◄◄PREVIOUS or ►MNEXT during piayback.
- Enlarge the picture - Zoom function (DVD)
- Q Press ZOOM during playback
- rn Pfess SET UP during playback
- PlayBack
- Q Press PBC after loading a disc (either when stopped or during playing)
- PLAYBACK (CONTtNUED)
- ARCH - BEGIN DVD PLAYBACK AT ANY DESIRED LOCATION
- PROGRAMMED PLAYBACK - PLAY AN AUDIO OR
- I REPEAT PUYBACK
- REPEATING A DVD
- Q Press REPEAT during playback.
- REPEATING A VIDEO CD/AN AUDIO CD
- Q Press REPEAT.
- REPEATING A SECTION BETWEEN TWO SPECIFIED POINTS (A-B REPEAT)
- I During playback, press A-B at the ^ ^ , starting point of the section you want to o Q repeat. ^
- 2 Press A-B again at the ending point of the section you want to repeat.
- CHANGING THE ANGLE ‘ ISKST ™"'
- DISPLAYING AND CHANGING SDBTITIES
- CHANGING THE AUDIO TRACK
- CHANGING SETUP VALUES
- I Press SETUP while the player is stopped.
- 2 Use AT to move the cursor (the yellow area) to the setting to be changed.
- 3 Press ENTER.
- Basic operations
- On-screen Menu
- Disc Languages
- Audio Output Setting
- Rating Limit
- [7]Press ENTER.
- [Tj At the initial setting screen, select “Rating Limit” by using AV. Then press ENTER.
- H] Press ENTER.
- ] Press ENTER.
- If you forget the password
- After confirming the password, press ENTER again.
- [9] Press o*^RETURN to return to the previous screen or press SETUP to exit the setup menu.
- To change the settings
- [T] At the initial setting screen, select “Ratings” by using AT. Then press ENTER.
- [sjChange the contents you would like to set, and press ENTER.
- [6] Press ENTER.
- [^After confirming the password, press ENTER again.
- Disc Resume
- Demonstration
- Country codes
- Language codes
- TROUBLESHOOTING
- SPECIFICATIONS
- ANTES DEL EMPLEO
- MANEJO Y LIMPIEZA
- COMPONENTES Y CONTROLES
- ' CONEXIONES
- Antes de realizar las conexiones
- PRECAUCION
- Conexión a un TV solamente
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- ’ CONEXIONES (CONTINUACIÓN)
- ‘reproducción (OPERACIONES BÁSICAS)
- Acerca de la indicación del símbolo 0
- Preparativos para la reproducción
- I Presione POWER en el reproductor DVD.
- 2 Presione AOPEN/CLOSE.
- 3 Introduzca un disco.
- 4 Presione AOPEN/CLOSE.
- Detención de la r video, CD de audii
- Presione ISTOP.
- Presione IIPAUSE/STILL dorante la
- reproducción.
- Avance de fotogramas (DVD, CD de video)
- Presione IIPAUSE/STILL mientras el disco se encuentra en el modo de pausa.
- REPRODUCCIÓN (CONTINUACIÓN)
- REPRODUCCIÓN (CONTINUACIÓN)
- BUSQUEDA - INICIO DE LA REPRODUCCIÓN DE
- Búsqueda de títulos
- Búsqueda de capítulos
- Búsqueda por tiempo
- Búsqueda de títulos (OVD)/Búsqueda de pistas (CD de video con PBC desactivada, CD de audio)
- I Presione T-SEARCH, bien durante la reproducción o la parada.
- Emplee los botones numéricos para introducir el número del título deseado.
- Presione ENTER o ►PLAY.
- DISCOS DVD EN EL PUNTO DESEADO
- REPRODUCCION PROGRAMADA - REPRODUCCIÓ
- REPRODUCCION REPETIDA
- CAMBIO DEL ANGULO
- VISUAUZACION Y CAMBIO DE StlÑTIYULOS
- CAMBIO DE LA PISTA DE AUDIO
- CAMBIO DE VALORES DE CONFIGURACION
- I Presione SETUP con el reproductor parado.
- Emplee AT para desplazar el cursor (área amarilla) hasta el ajuste que desee cambiar.
- 3 Presione ENTER.
- Operaciones básica
- On-screen Menu (Menú en pantalla)
- Guide Message (Mensaje guía):
- [l]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- Background (Fondo):
- [T]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- [3] Presione ENTER.
- [5] Presione ENTER.
- [3] Presione ENTER.
- Disc Languages (Idiomas de los discos)
- Audi
- alidi
- TV Aspect (Aspecto de TV
- Rating Limit (Límite de clasificación)
- Disc Resume (Reanud reproducción de disco:
- Demonstration (Demostración)
- Códigos de países
- Códigos de idiom
- SOLUCIÓN DE PROBLEMAS
- ESPECIFICACIONES
- * AVAMT L’UnllSATION
- MNIPULATION ET ENTffiTÎEN
- COMPOSANTS ET COMMANDES
- RACCORDEMENT
- Avant d’établir les connexions
- Raccordement à un téléviseu
- Raccordement à un téléviseur et à un système audi
- B Raccordement à un décodeur à traitement Dolby Digital ou à un amplificateur AV à décodeur Dolby Digital
- Q Raccordement décodeur DTS
- eur à traitement DTS ou à un amplificateur AV équipé d’un
- RACCORDEMENT (SUITE)
- LECTURE (OPÉRATIONS DE BASE)
- A propos de l’affichage du symbole 0
- Préparation
- I Appuyez sur le commutateur POWER du lecteur DVD.
- 2 Appuyez sur ±OPEN / CLOSE.
- 3 Placez un disque.
- 4 Appuyez sur ± OPEN / CLOSE.
- Arrêt de la lecture (DVD, CD vidéo, CD aud
- Q Appuyez sur ■ STOP.
- № Appuyez sur II PAUSE/STILL en
- ^ cours de lecture.
- Arrêt sur image (Pause) (DVD, CD vidéo, CD audio)
- Avance image par image (DVD, CD vidéo)
- Appuyez sur II PAUSE/STILL lorsque le disque se trouve en mode de pause.
- LECTURE (SUITE)
- LECTURE (SUITE)
- RECHERCHE - DÉMARRAGE DE lA LECTURE D’UN DVD
- Recherche de titre
- Recherche de chapitre
- Recherche temporeiie
- Recherche de titre (DVD)/ Recherche de plage (CD vidéo avec PBC désactivé, CD audio)
- I Appuyez sur T-SEARCH en mode de lecture ou d’arrêt.
- Utilisez les touches numériques pour introduire le numéro de titre voulu.
- 3 Appuyez sur ENTER ou ^PLAY.
- A UN ENDROIT DETERMINE
- LECTURE PROGRAMMEE - LECTURE D’UN CD AUDI
- ou VIDEO DANS UN ORDRE DETERMINE
- LfCIURE REPETEE
- CHANGEMENT D’ANGIT KSS'S'
- AFFICHAGE ET CHANGEMEHT DES SOUS-TITRES
- CHANGEMENT DE LA PLAGE AUDIO
- CHANGEMENT DES VAUURS DE REGUUiE
- Votre lecteur DVD est paramétré par défaut sur les valeurs
- I Appuyez sur SETUP alors que le lecteur se trouve en mode d’arrêt.
- Utilisez les touches AT pour déplacer le curseur (la zone jaune) sur le paramètre à modifier.
- 3 Appuyez sur ENTER.
- Opérations de bas
- Réglage de l’écran de menu
- tion de la langue d’affichage des disques
- Réglage de la sortie audio
- Réglage du format du télévise
- Réglage du niveau de limitation
- Réglage de la fonction de commande de H Réglage de la fonction de reprise de lecture lecture (PBC) H des disques
- Réglage du mode de démonstration
- Codes de pays
- Codes de langue
- dImnnage

TROUBLESHOOTING
If something seems to be wrong with your DVD player, first check the items in the table below.
Symptom Check
See page
The power does not come on.
• Make sure the power cord is plugged firmly info a live outlet. 8
A disc does not play.
• Is there condensation inside the DVD player? (Leave the player idle with
2
Playback stops almost the power on for 1 to 2 hours.)
immediately.
• Are you trying to use a disc that can’t be played, such as a CD-ROM? 4
• Is the disc dirty? Is it loaded properly?
5, 20
• Does the disc exceed the specified rating level?
42
No picture • Is the DVD player connected correctly? 8
• Are the video connections firmly attached? 8
• Is the television video mode set correctly?
20
The picture is bad. • Is the player in a place with lots of vibration?
8
• Are the video connections firmly attached?
5
• Is the disc dirty?
• Is the DVD player connected directly to the television set? Or is it
connected through a video deck, a selector switch, or a television with a
built-in video deck?
The picture may be bad when used with some television sets or projectors,
due to the DVD copy protection scheme.
The picture quality may also suffer if the DVD player is connected through
a selector switch with other video equipment. Try turning off the power
to the other video equipment.
The picture quality may be somewhat poor when paused, when doing
Frame Advance, or during fast forward or fast reverse. This is normal.
8
No sound
• Is the DVD player connected correctly?
8
• Are the audio connections firmly attached?
8
• Is the connected audio equipment turned on? Is the volume set correctly?
(Note that there will be no audio playback during slow playback. Frame
Advance, fast forward, or fast reverse.)
20
The remote control does not
• Are the remote control batteries installed correctly?
19
work, or does not work
• Is the remote control too far from the main unit? Is there something in
19
correctly. the way?
• Are the remote control batteries getting weak?
19
• Is the DVD player in sunlight or strong fluorescent light?
19
<
UJ
u
UJ
z
DVD has many capabilities
Some of these capabilities may differ based on the disc being
played. The following situations may be caused by information on
the disc itself.
• The audio or subtitles are not reproduced in the specified
default language.
• The audio track or subtitles cannot be changed.
• There are no subtitles.
• No DVD menu. The DVD menu does not display in the
language you want.
• The view angle cannot be changed.
• Everything on the disc is played back regardless of the rating
level you have set.
To reset
While the power is off, by pressing POWER on the main unit while
pressing ENTER and SETUP on the main unit simultaneously,
the initial condition is restored and “CLEAR” appears on the display.
As all the settings after purchase return to initial condition, set
them again.
ENGLISH 47










