User guide
Table Of Contents
- OPERATING INSTRUaiONS MANUAL DE INSTRUCCIONES MODE D'EMPLOI
- BEFORE USE
- HANDUNG AND CLEANING
- PARTS AND CONTROLS
- CONNECTIONS
- Connecting to a TV set only
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- ^ Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- Q Connecting to a decoder with DTS processing or an AV amplifier equipped with a DTS decoder
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- 2 Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- CONNECTIONS (CONTINUEO)
- PLAYBACK (THE BASICS)
- PUYBACK (CONTINUED)
- Slow Playback (DVD, video CD)
- Press ◄◄or is paused.
- while disc
- Fast Forward, Reverse (DVD, video CD, audio CD)
- Press
- ^^ playback.
- or
- during
- Skipping (DVD, video CD, audio CD)
- Press ¡◄◄PREVIOUS or ►MNEXT during piayback.
- Enlarge the picture - Zoom function (DVD)
- Q Press ZOOM during playback
- rn Pfess SET UP during playback
- PlayBack
- Q Press PBC after loading a disc (either when stopped or during playing)
- PLAYBACK (CONTtNUED)
- ARCH - BEGIN DVD PLAYBACK AT ANY DESIRED LOCATION
- PROGRAMMED PLAYBACK - PLAY AN AUDIO OR
- I REPEAT PUYBACK
- REPEATING A DVD
- Q Press REPEAT during playback.
- REPEATING A VIDEO CD/AN AUDIO CD
- Q Press REPEAT.
- REPEATING A SECTION BETWEEN TWO SPECIFIED POINTS (A-B REPEAT)
- I During playback, press A-B at the ^ ^ , starting point of the section you want to o Q repeat. ^
- 2 Press A-B again at the ending point of the section you want to repeat.
- CHANGING THE ANGLE ‘ ISKST ™"'
- DISPLAYING AND CHANGING SDBTITIES
- CHANGING THE AUDIO TRACK
- CHANGING SETUP VALUES
- I Press SETUP while the player is stopped.
- 2 Use AT to move the cursor (the yellow area) to the setting to be changed.
- 3 Press ENTER.
- Basic operations
- On-screen Menu
- Disc Languages
- Audio Output Setting
- Rating Limit
- [7]Press ENTER.
- [Tj At the initial setting screen, select “Rating Limit” by using AV. Then press ENTER.
- H] Press ENTER.
- ] Press ENTER.
- If you forget the password
- After confirming the password, press ENTER again.
- [9] Press o*^RETURN to return to the previous screen or press SETUP to exit the setup menu.
- To change the settings
- [T] At the initial setting screen, select “Ratings” by using AT. Then press ENTER.
- [sjChange the contents you would like to set, and press ENTER.
- [6] Press ENTER.
- [^After confirming the password, press ENTER again.
- Disc Resume
- Demonstration
- Country codes
- Language codes
- TROUBLESHOOTING
- SPECIFICATIONS
- ANTES DEL EMPLEO
- MANEJO Y LIMPIEZA
- COMPONENTES Y CONTROLES
- ' CONEXIONES
- Antes de realizar las conexiones
- PRECAUCION
- Conexión a un TV solamente
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- ’ CONEXIONES (CONTINUACIÓN)
- ‘reproducción (OPERACIONES BÁSICAS)
- Acerca de la indicación del símbolo 0
- Preparativos para la reproducción
- I Presione POWER en el reproductor DVD.
- 2 Presione AOPEN/CLOSE.
- 3 Introduzca un disco.
- 4 Presione AOPEN/CLOSE.
- Detención de la r video, CD de audii
- Presione ISTOP.
- Presione IIPAUSE/STILL dorante la
- reproducción.
- Avance de fotogramas (DVD, CD de video)
- Presione IIPAUSE/STILL mientras el disco se encuentra en el modo de pausa.
- REPRODUCCIÓN (CONTINUACIÓN)
- REPRODUCCIÓN (CONTINUACIÓN)
- BUSQUEDA - INICIO DE LA REPRODUCCIÓN DE
- Búsqueda de títulos
- Búsqueda de capítulos
- Búsqueda por tiempo
- Búsqueda de títulos (OVD)/Búsqueda de pistas (CD de video con PBC desactivada, CD de audio)
- I Presione T-SEARCH, bien durante la reproducción o la parada.
- Emplee los botones numéricos para introducir el número del título deseado.
- Presione ENTER o ►PLAY.
- DISCOS DVD EN EL PUNTO DESEADO
- REPRODUCCION PROGRAMADA - REPRODUCCIÓ
- REPRODUCCION REPETIDA
- CAMBIO DEL ANGULO
- VISUAUZACION Y CAMBIO DE StlÑTIYULOS
- CAMBIO DE LA PISTA DE AUDIO
- CAMBIO DE VALORES DE CONFIGURACION
- I Presione SETUP con el reproductor parado.
- Emplee AT para desplazar el cursor (área amarilla) hasta el ajuste que desee cambiar.
- 3 Presione ENTER.
- Operaciones básica
- On-screen Menu (Menú en pantalla)
- Guide Message (Mensaje guía):
- [l]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- Background (Fondo):
- [T]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- [3] Presione ENTER.
- [5] Presione ENTER.
- [3] Presione ENTER.
- Disc Languages (Idiomas de los discos)
- Audi
- alidi
- TV Aspect (Aspecto de TV
- Rating Limit (Límite de clasificación)
- Disc Resume (Reanud reproducción de disco:
- Demonstration (Demostración)
- Códigos de países
- Códigos de idiom
- SOLUCIÓN DE PROBLEMAS
- ESPECIFICACIONES
- * AVAMT L’UnllSATION
- MNIPULATION ET ENTffiTÎEN
- COMPOSANTS ET COMMANDES
- RACCORDEMENT
- Avant d’établir les connexions
- Raccordement à un téléviseu
- Raccordement à un téléviseur et à un système audi
- B Raccordement à un décodeur à traitement Dolby Digital ou à un amplificateur AV à décodeur Dolby Digital
- Q Raccordement décodeur DTS
- eur à traitement DTS ou à un amplificateur AV équipé d’un
- RACCORDEMENT (SUITE)
- LECTURE (OPÉRATIONS DE BASE)
- A propos de l’affichage du symbole 0
- Préparation
- I Appuyez sur le commutateur POWER du lecteur DVD.
- 2 Appuyez sur ±OPEN / CLOSE.
- 3 Placez un disque.
- 4 Appuyez sur ± OPEN / CLOSE.
- Arrêt de la lecture (DVD, CD vidéo, CD aud
- Q Appuyez sur ■ STOP.
- № Appuyez sur II PAUSE/STILL en
- ^ cours de lecture.
- Arrêt sur image (Pause) (DVD, CD vidéo, CD audio)
- Avance image par image (DVD, CD vidéo)
- Appuyez sur II PAUSE/STILL lorsque le disque se trouve en mode de pause.
- LECTURE (SUITE)
- LECTURE (SUITE)
- RECHERCHE - DÉMARRAGE DE lA LECTURE D’UN DVD
- Recherche de titre
- Recherche de chapitre
- Recherche temporeiie
- Recherche de titre (DVD)/ Recherche de plage (CD vidéo avec PBC désactivé, CD audio)
- I Appuyez sur T-SEARCH en mode de lecture ou d’arrêt.
- Utilisez les touches numériques pour introduire le numéro de titre voulu.
- 3 Appuyez sur ENTER ou ^PLAY.
- A UN ENDROIT DETERMINE
- LECTURE PROGRAMMEE - LECTURE D’UN CD AUDI
- ou VIDEO DANS UN ORDRE DETERMINE
- LfCIURE REPETEE
- CHANGEMENT D’ANGIT KSS'S'
- AFFICHAGE ET CHANGEMEHT DES SOUS-TITRES
- CHANGEMENT DE LA PLAGE AUDIO
- CHANGEMENT DES VAUURS DE REGUUiE
- Votre lecteur DVD est paramétré par défaut sur les valeurs
- I Appuyez sur SETUP alors que le lecteur se trouve en mode d’arrêt.
- Utilisez les touches AT pour déplacer le curseur (la zone jaune) sur le paramètre à modifier.
- 3 Appuyez sur ENTER.
- Opérations de bas
- Réglage de l’écran de menu
- tion de la langue d’affichage des disques
- Réglage de la sortie audio
- Réglage du format du télévise
- Réglage du niveau de limitation
- Réglage de la fonction de commande de H Réglage de la fonction de reprise de lecture lecture (PBC) H des disques
- Réglage du mode de démonstration
- Codes de pays
- Codes de langue
- dImnnage

BEFORE USE
Please read the following before operating the DVD player.
Disc-related terms
I
Disc formats supported by the player
This DVD player can play discs with the following marks only.
jjyp
TM
DVDs
(8 cm disc/12 cm disc)
i
COMPACT
D§®
Video CDs
(8 cm disc/12 cm disc)
[digital VIDEOl
DIG
COMPACT
Di®
TAL AUDIO
Audio CDs
(8 cm disc/12 cm disc)
• Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
Color system of the DVDs and video CDs
This unit Is designed for the NTSC color systems only.
The materials for both the DVD discs and the video CDs are
recorded in the PAL and NTSC color systems.
Select the DVDs and video CDs recorded in the NTSC color
system.
Notes on DVDs and video CDs
Some playback operations of DVDs and video CDs may be
intentionally fixed by software manufacturers. As this player plays
DVDs and video CDs according to disc contents designed by the
software manufacturer, some playback features of this player may
not be available, or other functions may be added.
Also refer to the instructions supplied with the DVDs and video
CDs.
Some DVDs made for business purposes may not be played on
this player.
Region code of the DVD player and DVDs
This DVD player is designed and manufactured for playback of
region “1 ” encoded DVD software. Region code labels appear on
the labels of some DVD discs to indicate which type of player can
play those discs. Unless “1” is included in these labels, or “ALL”
appears on the DVD disc labels, those discs cannot be played on
this player. If you try to play these discs, the message “REGIONAL
CODE VIOLATION” will appear on the TV screen. Some DVD discs
may not have a region code label even though their playback is
prohibited by area limits.
Note on DTS-encoded CDs
When playing DTS-encoded CDs, excessive noise will be exhibited
from the analog stereo outputs. To avoid possible damage to the
audio system, the consumer should take proper pre-cautions when
the analog stereo outputs of the CD player is connected to an
amplification system. To enjoy DTS Digital Surround™ playback,
an external 5.1 channel DTS Digital Surround™ decoder system
must be conneted to the digital output (S/PDIF, AES/EBU, or
TosLink) of the CD player.
Title
The longest section of a picture or a musical piece on a DVD; a
movie for a picture piece on video software, or an album for a
musical piece on audio software
Each title is assigned a title number enabling you to locate the title
you want.
Chapter
Sections of a picture or a musical piece that are smaller than titles
A title is composed of several chapters. Each chapter is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, there may be no chapter
recorded.
Track
Sections of a picture or a musical piece on a video CD or an audio
CD
Each track is assigned a track number, enabling you to locate the
track you want.
Scene
On a video CD with PBC (playback control) functions, moving
pictures and still pictures are divided into sections called “Scenes”.
Each scene is displayed in the menu screen and assigned a scene
number, enabling you to locate the scene you want.
A scene is composed of one or several tracks.
There are two types of video CDs.
Video CDs equipped with PBC (Version 2.0)
PBC (playback control) allows you to interact with the system via
menus, search functions or other typical computer-like operations.
Moreover, still pictures of high resolution can be played, if they
are included in the disc.
Video CDs not equipped with PBC (Version 1.1)
Operated in the same way as audio CDs, these discs allow
playback of video pictures as well as sound, but they are not
equipped with PBC.
This player cannot play discs such as CD-ROMs, other than those
listed in the table on this page, including PHOTO CDs, CD-I, DVD-
ROMs.
4 ENGLISH










