User guide
Table Of Contents
- OPERATING INSTRUaiONS MANUAL DE INSTRUCCIONES MODE D'EMPLOI
- BEFORE USE
- HANDUNG AND CLEANING
- PARTS AND CONTROLS
- CONNECTIONS
- Connecting to a TV set only
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- ^ Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- Q Connecting to a decoder with DTS processing or an AV amplifier equipped with a DTS decoder
- I Remove the dust cap on the DIGITAL AUDIO OUT jack of the player.
- 2 Connect the optical connecting cord firmly so that the configurations of both the plug and the jack match.
- CONNECTIONS (CONTINUEO)
- PLAYBACK (THE BASICS)
- PUYBACK (CONTINUED)
- Slow Playback (DVD, video CD)
- Press ◄◄or is paused.
- while disc
- Fast Forward, Reverse (DVD, video CD, audio CD)
- Press
- ^^ playback.
- or
- during
- Skipping (DVD, video CD, audio CD)
- Press ¡◄◄PREVIOUS or ►MNEXT during piayback.
- Enlarge the picture - Zoom function (DVD)
- Q Press ZOOM during playback
- rn Pfess SET UP during playback
- PlayBack
- Q Press PBC after loading a disc (either when stopped or during playing)
- PLAYBACK (CONTtNUED)
- ARCH - BEGIN DVD PLAYBACK AT ANY DESIRED LOCATION
- PROGRAMMED PLAYBACK - PLAY AN AUDIO OR
- I REPEAT PUYBACK
- REPEATING A DVD
- Q Press REPEAT during playback.
- REPEATING A VIDEO CD/AN AUDIO CD
- Q Press REPEAT.
- REPEATING A SECTION BETWEEN TWO SPECIFIED POINTS (A-B REPEAT)
- I During playback, press A-B at the ^ ^ , starting point of the section you want to o Q repeat. ^
- 2 Press A-B again at the ending point of the section you want to repeat.
- CHANGING THE ANGLE ‘ ISKST ™"'
- DISPLAYING AND CHANGING SDBTITIES
- CHANGING THE AUDIO TRACK
- CHANGING SETUP VALUES
- I Press SETUP while the player is stopped.
- 2 Use AT to move the cursor (the yellow area) to the setting to be changed.
- 3 Press ENTER.
- Basic operations
- On-screen Menu
- Disc Languages
- Audio Output Setting
- Rating Limit
- [7]Press ENTER.
- [Tj At the initial setting screen, select “Rating Limit” by using AV. Then press ENTER.
- H] Press ENTER.
- ] Press ENTER.
- If you forget the password
- After confirming the password, press ENTER again.
- [9] Press o*^RETURN to return to the previous screen or press SETUP to exit the setup menu.
- To change the settings
- [T] At the initial setting screen, select “Ratings” by using AT. Then press ENTER.
- [sjChange the contents you would like to set, and press ENTER.
- [6] Press ENTER.
- [^After confirming the password, press ENTER again.
- Disc Resume
- Demonstration
- Country codes
- Language codes
- TROUBLESHOOTING
- SPECIFICATIONS
- ANTES DEL EMPLEO
- MANEJO Y LIMPIEZA
- COMPONENTES Y CONTROLES
- ' CONEXIONES
- Antes de realizar las conexiones
- PRECAUCION
- Conexión a un TV solamente
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- CONEXIONES (CONTINUACIÓN)
- ’ CONEXIONES (CONTINUACIÓN)
- ‘reproducción (OPERACIONES BÁSICAS)
- Acerca de la indicación del símbolo 0
- Preparativos para la reproducción
- I Presione POWER en el reproductor DVD.
- 2 Presione AOPEN/CLOSE.
- 3 Introduzca un disco.
- 4 Presione AOPEN/CLOSE.
- Detención de la r video, CD de audii
- Presione ISTOP.
- Presione IIPAUSE/STILL dorante la
- reproducción.
- Avance de fotogramas (DVD, CD de video)
- Presione IIPAUSE/STILL mientras el disco se encuentra en el modo de pausa.
- REPRODUCCIÓN (CONTINUACIÓN)
- REPRODUCCIÓN (CONTINUACIÓN)
- BUSQUEDA - INICIO DE LA REPRODUCCIÓN DE
- Búsqueda de títulos
- Búsqueda de capítulos
- Búsqueda por tiempo
- Búsqueda de títulos (OVD)/Búsqueda de pistas (CD de video con PBC desactivada, CD de audio)
- I Presione T-SEARCH, bien durante la reproducción o la parada.
- Emplee los botones numéricos para introducir el número del título deseado.
- Presione ENTER o ►PLAY.
- DISCOS DVD EN EL PUNTO DESEADO
- REPRODUCCION PROGRAMADA - REPRODUCCIÓ
- REPRODUCCION REPETIDA
- CAMBIO DEL ANGULO
- VISUAUZACION Y CAMBIO DE StlÑTIYULOS
- CAMBIO DE LA PISTA DE AUDIO
- CAMBIO DE VALORES DE CONFIGURACION
- I Presione SETUP con el reproductor parado.
- Emplee AT para desplazar el cursor (área amarilla) hasta el ajuste que desee cambiar.
- 3 Presione ENTER.
- Operaciones básica
- On-screen Menu (Menú en pantalla)
- Guide Message (Mensaje guía):
- [l]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- Background (Fondo):
- [T]En la pantalla de ajuste inicial, seleccione “On screen Menu” mediante AT. A continuación, presione ENTER.
- [3] Presione ENTER.
- [5] Presione ENTER.
- [3] Presione ENTER.
- Disc Languages (Idiomas de los discos)
- Audi
- alidi
- TV Aspect (Aspecto de TV
- Rating Limit (Límite de clasificación)
- Disc Resume (Reanud reproducción de disco:
- Demonstration (Demostración)
- Códigos de países
- Códigos de idiom
- SOLUCIÓN DE PROBLEMAS
- ESPECIFICACIONES
- * AVAMT L’UnllSATION
- MNIPULATION ET ENTffiTÎEN
- COMPOSANTS ET COMMANDES
- RACCORDEMENT
- Avant d’établir les connexions
- Raccordement à un téléviseu
- Raccordement à un téléviseur et à un système audi
- B Raccordement à un décodeur à traitement Dolby Digital ou à un amplificateur AV à décodeur Dolby Digital
- Q Raccordement décodeur DTS
- eur à traitement DTS ou à un amplificateur AV équipé d’un
- RACCORDEMENT (SUITE)
- LECTURE (OPÉRATIONS DE BASE)
- A propos de l’affichage du symbole 0
- Préparation
- I Appuyez sur le commutateur POWER du lecteur DVD.
- 2 Appuyez sur ±OPEN / CLOSE.
- 3 Placez un disque.
- 4 Appuyez sur ± OPEN / CLOSE.
- Arrêt de la lecture (DVD, CD vidéo, CD aud
- Q Appuyez sur ■ STOP.
- № Appuyez sur II PAUSE/STILL en
- ^ cours de lecture.
- Arrêt sur image (Pause) (DVD, CD vidéo, CD audio)
- Avance image par image (DVD, CD vidéo)
- Appuyez sur II PAUSE/STILL lorsque le disque se trouve en mode de pause.
- LECTURE (SUITE)
- LECTURE (SUITE)
- RECHERCHE - DÉMARRAGE DE lA LECTURE D’UN DVD
- Recherche de titre
- Recherche de chapitre
- Recherche temporeiie
- Recherche de titre (DVD)/ Recherche de plage (CD vidéo avec PBC désactivé, CD audio)
- I Appuyez sur T-SEARCH en mode de lecture ou d’arrêt.
- Utilisez les touches numériques pour introduire le numéro de titre voulu.
- 3 Appuyez sur ENTER ou ^PLAY.
- A UN ENDROIT DETERMINE
- LECTURE PROGRAMMEE - LECTURE D’UN CD AUDI
- ou VIDEO DANS UN ORDRE DETERMINE
- LfCIURE REPETEE
- CHANGEMENT D’ANGIT KSS'S'
- AFFICHAGE ET CHANGEMEHT DES SOUS-TITRES
- CHANGEMENT DE LA PLAGE AUDIO
- CHANGEMENT DES VAUURS DE REGUUiE
- Votre lecteur DVD est paramétré par défaut sur les valeurs
- I Appuyez sur SETUP alors que le lecteur se trouve en mode d’arrêt.
- Utilisez les touches AT pour déplacer le curseur (la zone jaune) sur le paramètre à modifier.
- 3 Appuyez sur ENTER.
- Opérations de bas
- Réglage de l’écran de menu
- tion de la langue d’affichage des disques
- Réglage de la sortie audio
- Réglage du format du télévise
- Réglage du niveau de limitation
- Réglage de la fonction de commande de H Réglage de la fonction de reprise de lecture lecture (PBC) H des disques
- Réglage du mode de démonstration
- Codes de pays
- Codes de langue
- dImnnage
Skipping (DVD, video CD, audio CD)
PREVIOUS NEXT
Press ¡◄◄PREVIOUS or ►MNEXT
during piayback.
Skip to the next chapter or track: ^>1
The disc position advances one chapter or track each time the
button is pressed.
Return to the previous chapter or track:
In each disc, pressing once makes to skip to the beginning of
the chapter (track) currently being played, and pressing twice
makes to skip to the previous chapter.
To skip to the desired chapter or track directiy using the
remote control (video CD, audio CD)
When stopped or during playback, enter the desired track number
using the numbered buttons on the remote control.
Example: To play track 12
Press +10,2 (or 1,2) on the remote control, then press
►PLAY or ENTER.
Example: To play track 20
Press +10, +10 (or 2, 0) on the remote control, then
press ►PLAY or ENTER.
Playback begins at the beginning of the selected track.
Enlarge the picture - Zoom function (DVD)
ZOOM
Q Press ZOOM during playback
The picture around the center of the screen is enlarged
to approximately 4 times.
Press ZOOM again to return to normal playback.
To move the enlarged picture
Press To return to the center, press C.
The DVD player displays messages about various operations on
the television screen. Ordinarily, these messages will disappear
after being displayed for a few seconds. However, you can also
set the player to continuously display the elapsed time or remaining
time (end time) of the disc being played.
rn Pfess SET UP during playback
DVD:
Elapsed time of the title being played .
Remaining time of the title being played
Elapsed time of the chapter being played
Remaining time of the chapter being played
Video or audio CD: (except when PBC is activated)
The track being played and its elapsed time
The track being played and its remaining time
Elapsed time of the disc being played*
Remaining time of the disc being played*
CD
<
CL
UJ
Q.
O
U
CD
<
CD
‘During programmed playback, the elapsed time or
remaining time of the programmed tracks.
PlayBack
When using menu playback with a video CD, the player returns to
the menu display when the selected scene finishes.
You can also set the player to play the entire CD without returning
to the menu screen, just like with normal audio CDs and video
CDs with no menu capabilities.
Q Press PBC after loading a disc (either
when stopped or during playing)
“PBC” disappears from the display panel, and the menu
playback feature is disabled.
Pressing PBC during menu playback will cause playback
to stop, and the menu playback feature is disabled.
Turning off the PBC feature (PlayBack Control) allows
you to use repeat or programmed playback.
When PBC is pressed during playback, playback stops. Then PBC
mode changes.
ENGLISH 23