User guide

Table Of Contents
PLAYBACK (THE BASICS)
► PLAY
MENU
ENTER
Numbered
buttons
About the 0 symbol display
The 0 symbol will be displayed on the screen if you press
a button which cannot be used or enter an incorrect number.
Some DVD discs may have places where they do not allow
pressing the STOP, SKIP, or other buttons. The 0 mark
will be displayed on the screen if you press a button that is
not allowed in such a place.
Getting ready to play
Turn on the television, and set its video source (Video 1, Video
2, Video 3, etc.) to the one connected to the DVD player.
Turn on the audio device connected to the DVD player. Set its
input source to the one connected to the DVD player.
I Press POWER on the DVD player.
The power comes on, and the STANDBY lamp on the
POWER turns green.
^ Press A OPEN/CLOSE.
The disc tray opens.
3 Load a disc.
Place a disc in the tray guides (depression), with the label
side facing up. When loading an 8-cm disc, place it in the
inner depression.
4 Press ±OPEN/CLOSE.
The disc tray closes, and the DVD player automatically
begins to play the disc.
V
hk
Iff
^ A
Zi .....iV
f ff^
T
RWH 1 mi RY DIGITAI 1
TITLE A CHP h
>T^- s
OURMIN SEC
If the disc does not begin to play, press ►PLAY.
20 ENGLISH