User guide

Connecting headphones
Remote control
Connect headphones to the PHONES jack with a stereo
standard plug, and adjust the volume with PHONE LEVEL.
Installing batteries
Detach the battery cover on the rear of the remote control, and
insert two R6 (size AA) batteries with O and © aligned correctly.
0
(/)
Z
o
g
oc
LU
cc
Q.
When to replace the batteries
The maximum operational distance between the remote control
and the sensor of the units should be approximately 5 meters (16
feet). If this distance decreases, replace the batteries with new
ones.
Before connection, turn PHONE LEVEL toward MIN.
NOTES
' When operating with the remote control, point the top of the
remote control toward the player.
' If the unit is not going to be used for an extended period of time,
remove the batteries to prevent possible electrolyte leakage.
' The remote control may not operate correctly when:
- The line of sight between the remote control and the unit is
exposed to intense light, such as direct sunlight
- There is fluorescent lighting near the remote sensor in the
display panel window.
- Other remote controls are used nearby (those of a TV set, etc.).
ENGLISH 19