User Manual

14
US
Installing the TV to the Wall from Table-Top Stand
1 Remove the stand cover and terminal covers.
2 Remove the screws from the rear of the TV.
3 Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied).
Note
Note
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
• You cannot use some of the cable holders on the rear of the TV when using a Wall-Mount Bracket (not
supplied).
ʕ
ʖ
ʔ
ʓ
Wall-Mount Bracket
(not supplied)
Screw (not supplied)