Owner's Manual

Installing
the
TV
to
the
Wall
This
TV's
instruction manual only provides the steps to prepare the
TV
for Wall-Mount
installation before it
is
installed on the wall.
Your
TV
can
be mounted
on
a wall using a Wall-Mount Bracket (not supplied) out
of
the box
as
packaged.
If
the
Table-Top
Stand
is
attached to the
TV,
the
TV
may require detaching the
Table-Top
Stand;
see
page
15
(Detaching the Table-Top Stand
from the
TV).
Prepare the
TV
for the Wall-Mount Bracket before making cable connections.
For
product
protection
and
safety reasons, Sony
strongly
recommends
that
installation
of
your
TV
on
the
wall
be
performed
by
qualified
professionals. Do
not
attempt
to
install
it
yourself.
• Follow
the
instruction
guide
provided
with
the
Wall-Mount
Bracket
for
your
model.
Sufficient expertise
is
required in
installing
this
TV,
especially
to
determine
the
strength
of
the
wall
for
withstanding
the
TV's
weight.
•
The
length
of
the
screw
for
Wall-Mount
Bracket differs
depending
on
the
Wall-Mount
Bracket thickness. Please refer
to
below
illustration.
10
mm
-14
mm
?-Screw
(M6)
L-
Wall-Mount
Bracket
TV's rear cover
•
Be
sure
to
store
the
unused screws and Table-Top Stand in a safe place until you are
ready
to
attach
the
Table-Top Stand. Keep
the
screws
away
from
small
children.
Note
•
Read
the
supplied
Safety Booklet
for
additional safety information.
•
You
can
remove the
foot
parts and screws after the
TV
is
completely installed
to the
wall.
~e---Screw
•
Be
sure
to
store the removed
foot
parts and screws in a safe
place, keeping them away from
children.
•
Be
sure
to
attach the
foot
parts and screws at original
position when using the
Table-Top Stand.
If
using an
electric
screwdriver, set the torque at
approximately 0.4 N·m
{4 kgf·cm}.
II