Wall Mount Instructions

− 20 (US) −
Installing the TV to the Wall
from Table-Top Stand
1 Remove the screws from the
rear of the TV.
Note

Be sure to store the removed screws and unused
parts in a safe place, keeping them away from
children.
2 Attach the
WM2
to the TV
using the screw (previously
removed on step 1).
WM2
Screw
3 Detach the Table-Top Stand
from the TV.

Remove one side of the Table-Top Stand
at a time. Firmly hold the Table-Top
Stand securely with both hands while
the other people lift up the TV.

Repeat the previous step and remove
the other side of the Table-Top Stand.
Note

Three or more people are required to detach the
Table-Top Stand.

Be careful not to use excessive force while detaching
the Table-Top Stand from the TV as it may cause the
TV set to fall resulting in personal injury or physical
damage to the TV.

Take care when handling the Table-Top Stand to
prevent damage to the TV.

Be careful when lifting the TV as the Table-Top Stand
is detached, the Table-Top Stand may topple over
and cause personal injury.

Take care when removing the Table-Top Stand from
the TV to prevent it from falling over and damaging
the surface that the TV is sitting on.

Be sure to store the removed screws in a safe place,
keeping them away from children.