Wall Mount Instructions

− 10 (US) −
Note

We recommend you to check the
position of TV in the viewing
environment.
2
3 Align
WM4
to the wall and
make four marks aligned with
the studs.
WM4
Note

Use a level to check whether
WM4
is level.
4 Drill upper pilot holes on the
marks.
75 mm
(3 inch)
5.5 mm
(7/32 inch)
Stud or Reinforcement
Note

Pilot holes must be drilled to a depth of 75 mm
(3 inch), using a 5.5 mm (7/32 inch) diameter drill bit.
5 Install
WM4
on the wall.
WW1
WS2
Note

Use a level to check whether
WM4
is level.
Precaution

Do not over-tighten the lag bolts
WS2
. Improper
tightening could reduce the holding power of the lag
bolts
WS2
.
6 Drill lower pilot holes on the
marks. (Refer step 4 for the drill
instruction.)