Help Guide

*Strip about 10 mm (13/32 inches) of insulation from the speaker cable at each end.
Note
To prevent the wires of the speaker cable from touching each other, make sure not
to strip too much of the speaker cable.
Connect the speaker cable properly so that the polarities (+/-) between the TV and
AV receiver match.
Related topics
Connecting an audio system
[64] Using the TV with Other Devices | Audio system
Pass-through audio formats supported with eARC
Confirm that you can pass-through the following audio formats.
7.1 channel linear PCM: 32/44.1/48 kHz 16 bits
Dolby Digital
Dolby Digital Plus
DTS
Dolby TrueHD
DTS-HD MA
Dolby Atmos - Dolby Digital Plus
Dolby Atmos - Dolby TrueHD
DTS:X Master Audio