Help Guide

2 Turn on the connected audio system, then adjust the volume.

If you connect a BRAVIA Sync-compatible device with an HDMI connection, you

can operate it by simply using the TV’s remote control.

Note

You need to configure the [Digital audio out] settings according to your audio system.

Press the HOME button, then select [Settings] — [Sound] — [Digital audio out].

If the audio system is not compatible with Dolby Digital or DTS, set [Settings] —

[Sound] — [Digital audio out] to [PCM].

The [Digital audio out] settings are disabled while audio signals are passed through

while watching HDMI input using eARC.

Hint

If a specific audio system is connected with an HDMI cable, you can adjust the

output timing of the picture and sound.

Adjusting the AV sync setting

For details about supported models, refer to the support site.

Support Site