Help Guide
1
Connecting the TV and audio system using a digital optical cable
Setting [Digital audio out] to [PCM]
For details about digital optical cable connections, refer to the Connecting an audio
system page.
[133] Troubleshooting | Sound
You are concerned about a delay between the
picture and sound.
If a Bluetooth audio device is connected
The picture and sound do not match because the sound is delayed due to the properties
of Bluetooth. You can adjust the output timing of the picture and sound with the A/V sync
setting.
To enable [A/V sync], press the HOME button, then select [Settings] —
[Sound] — [A/V sync].
If a specific audio system is connected with an HDMI cable
You can adjust the output timing of the picture and sound. For details about supported
models, refer to the support site.
Support Site
Related topics