Operating Instructions

19
Radio reception display and controls
The following display appears during radio reception.
* Appears only when the station stored in memory is received.
Tip
For details on other radio functions, see “Advanced Operations — Radio” on page 29.
No. Item Explanation
A Station information Indicates the current band number, preset number*, or frequency/
status.
B ATT Touch to attenuate the sound. To cancel, touch again.
C Source Indicates the current source.
D Active function Indicates the currently active functions (Pro Logic II, EQ7, or
Zone × Zone).
E PLAY MODE Touch to open the play mode menu, which contains the
following.
• Mono: Touch to activate the monaural mode if FM reception is
poor. To restore stereo reception, select “OFF.”
• Local: Touch to only tune into stations with stronger signal. To
tune normal stations, select “OFF.”
• IF: Touch to set to “Wide” to hear FM stereo broadcasts in
stereo and with full frequency reception. To narrow the
reception frequency automatically to eliminate noise, select
“Auto.”
F Volume level Indicates the volume level. When ATT is activated, appears.
G PRESET LIST Touch to list up stored stations, or store stations. (page 29)
GEFDC
BA